Speedo is not accurate

[LeKiD]

My speedo is not accurate between 60mph and up, the needle goes up but it stick and the needle is not moving if i accelerate or decelrate of 5mph or less ... and when the needle is moving its making a bump.

Do i need to lubricate something or a need to change the cluster

Alex

 

[jasonpalamar]

Never had that problem.

 

[jynski]

The only problem I've had is the speedo is slow. Approx. 5mph according to my GPS.

 

[LeKiD]

I need to tap with my hand the cluster to have the actual speed.

 

[LeKiD]

Is there a way to lubricate the needle to move easily or something else ??

Its very annoying to not have the acutal speed, sometime it s near 10kmh of difference + or -

The RPM needle move free and all the others too. I reset my cluster by holding the trip button.

 

[LeKiD]

Ttt

 

[offroadkarter]

open the cluster up and see if it spins easy with your hand....

Maybe you just have to lift the needle ever so slightly so it wont bind

 

[FORDSVTPARTS]

Has anything been done to the cluster? Aftermarket gauge face maybe?

The clusters in these cars have typically been very dependable.

 

[Sapperstang]

The only problem I've had is the speedo is slow. Approx. 5mph according to my GPS.

Same here.

 

[LeKiD]

Has anything been done to the cluster? Aftermarket gauge face maybe?

The clusters in these cars have typically been very dependable.

It s been a long time but here I'm I

I removed my cluster and disassembled everything and inspect all gauge are free but the needle for the speed is not touching to the cluster but when I rotate the needle it stay where I left instead to slow down to its original position.

Is the all four electro-magnet that control are interchangeable ? I could buy a stock cluster and swap the broken part .