Spent part of my bonus on Paxton kit from beefcake

[calgarybandit]

I ordered Fore Innovations stage 3 Kit the Fuel Rail Option: Black Fuel Pumps: Two 465lph pumps + prefilters Electrical Upgrade:FC3 Staged Controller with 4 gauge wiring Fuel Lines:Startlite -10 Feed, -8 Return Mechanical Gauge:0-100 psi Fuel Pressure Gauge Reusable filters. Paxton 2200SL / Self Lubricated 8-Rib Kit : Included 2nd Pulley Choice : 3.33 Inch Kit Finish : Satin Injector Size : Injector Dynamics ID 1000's (Included) Boss 302 Intake Adapter : Boss Intake Adapter Air Intake Upgraded : Paxton Competition Inlet
Going to run 91 Shell tune and a Shell URT 116 race tune hoping for 600-700 on the dyno :rockon:

 

[ah4449]

Must have been a nice bonus!!

 

[busarich]

Nice order. Congrats.

 

[89 5.0]

Cant wait to see numbers

 

[schecter]

You should be 6-700 with ease. Nice choice on setup

 

[pohnjarker]

i bet you'll be close to 700 no problem

 

[Sof Top]

fuel system + ID1000s + 3.33 pulley + 116 = easy mid 700s


Awesome setup OP!

 

[calgarybandit]

fuel system + ID1000s + 3.33 pulley + 116 = easy mid 700s

Thanks I hope so the DA up here sites around 4400-5000 so we will see. What setup do you have running 11 PSI? I am hoping the 3.33 will give me 9-11 PSI. The elevation up here kills boost....

 

[slagburn]

Nice parts list, some of it looks very familiar.. can't wait to get my Fore stuff in!

 

[calgarybandit]

Nice parts list, some of it looks very familiar.. can't wait to get my Fore stuff in!

Looking forward to your numbers and a write on the fuel system.

 

[13DIB5.0]

Stock motor? Auto or stick?

 

[Sof Top]

Thanks I hope so the DA up here sites around 4400-5000 so we will see. What setup do you have running 11 PSI? I am hoping the 3.33 will give me 9-11 PSI. The elevation up here kills boost....

Yeah DA plays a big role. I have the 3.48 pulley for 11psi.

 

[calgarybandit]

Stock motor? Auto or stick?

Stock block for now until Ford releases there new 5.0 block then I am doing a built long block with a 2.95 pulley.

Here are my current mods 20 x 8.5 - 10 TSW Nurburgring rims, 255/40/20 Nitto Invo, 315/30/20 R888 Toyo Proxes, Steeda LCA, Steeda Panhard bar, Roush UCA, Eibach front and rear sway bar kit, C&L CAI, Kooks 1 -3/4 Kooks headers and offroad x-pipe, Magnaflow street series cat back, Boss 302 intake, 82 MM L&M Throttle body, 93 AED Sport Tune, 3.31 FRPP gears, Circle D 4C 3700 stall, Eibach Coilovers, DSS carbon fiber drive shaft.

 

[13DIB5.0]

I'm about to order my kit too im at sea level so whst pulley do I need for 10lbs?

 

[busarich]

I Hit 10 #S With A Stock Pulley. Im Here In Nd And It Was 40 Deg Out.

 

[calgarybandit]

I'm about to order my kit too im at sea level so what pulley do I need for 10lbs?

I would assume 3.6 or 3.48for sure. Typically what ever you guys see at sea level its about 2-4 #'s of boost more then I would see