JimIII@jdm
Well-Known Member
The 2010-2012 Super Cobra Jet Mustang utilizes a 140mm MAF housing to support over 1000 RWHP on the Stock GT500 MAF sensor. We have performed extensive testing on numerous Super Cobra Jet Mustangs and a small hand full of GT500's with this MAF combination. There are a few alternatives out there that work well and are even bigger than 140mm. However we still get a lot of calls and interest about the Ford Racing 140mm housing because of the brand and appearance it has underneath the hood. The 140mm MAF is available through Team JDM and many other Ford Racing parts vendors. However the inlet tube to connect it to your throttle body is no longer available. Ford Racing discontinued it, but we contacted the good people at Watson Engineering and they said they would re-introduce it and have it sold exclusively through JDM is we ordered enough units. Here is where you become involved! I have a customer who is very interested and ready to order one. I wanted to know if there is anyone else who would be interested and would like to purchase one as well.
These were designed for the Cobra Jet which does not run the PCV system, we have added a fitting to the tubes before that allow you to connect the stock PCV line. So we can offer the tube in both forms for Street or Race applications. Below is a picture of this air inlet tube installed on a 2008 GT500 with a 4.0L Whipple Supercharger. Please comment below with your thoughts, opinions, and questions! Cost will be based upon how many are made and the option of having the PCV connection.
Thank you,
JimIII@JDM
Installed on a Super Cobra Jet no PCV connection:
These were designed for the Cobra Jet which does not run the PCV system, we have added a fitting to the tubes before that allow you to connect the stock PCV line. So we can offer the tube in both forms for Street or Race applications. Below is a picture of this air inlet tube installed on a 2008 GT500 with a 4.0L Whipple Supercharger. Please comment below with your thoughts, opinions, and questions! Cost will be based upon how many are made and the option of having the PCV connection.
Thank you,
JimIII@JDM
Installed on a Super Cobra Jet no PCV connection: