Over filled tranny and flooded vent! How do you clean the vent so that the tranny does not build up internal pressure....help pls *
Ok so you have a new tailshaft seal and it still leaks fluid-----yes
1.Did you put any lube(grease,oil) on the rubber part of the seal before installing the yoke?---yes
2.Did you use a small amount of RTV on the metal part of the seal that seats against the ----yes
3.Is the yoke free of any burs,rough areas? ---yes I checked it before reinstall
4.Do you have a little or alot of play at the yoke when installed in the tailshaft--- I will have to check--
5.Do you have the correct amount of fluid--- yes 2.7 quarts
Not trying to kill you with ???? just gotta start from scratch ----it's all good brother it helps ya back track and think about something I might have missed...
If you have alot of play at the yoke then fluid may be getting by at that area,it should not be hard to replace.Ill Look more up at work should just be able to pull the housing off and replace the bushing.