• Welcome to SVTPerformance!

tech help

Discussion in 'Turbo Cobras' started by SVTGT, Jul 23, 2008.

  1. SVTGT

    SVTGT Member Established Member

    Messages:
    107
    Joined:
    Aug 11, 2007
    Location:
    ERIE Pa.
    does anyone have a decent list of the parts required for a turbo swap for a 03/04 cobra. anyinfo would be help.
     
  2. 03 Whippled Cobra

    03 Whippled Cobra Active Member Established Member

    Messages:
    1,086
    Joined:
    Jun 22, 2007
    Location:
    Exton, Pa
    Directly from Hellion's website:

    99-01 Alternator #YR3210346AA
    Alternator Bracket #XR3Z-10153-AB
    99-01 Cobra Intake (Lower) #YR3Z9424BA (Upper) #XR3Z9424AA
    99-01 Serpentine Belt #4060980 ^ 6PK2490
    99-01 Throttle Cable Bracket & Cable Bracket # XR3Z9728CA Cable #1R3Z9A758CA
    Alternator Wires to extend . pigtail #1U2Z14S411UA
    *If keeping EGR is desired, need 99-01 EGR tube # XR3Z9D477DB

    This doesn't include the turbo kit itself or the k-member and suspension parts you might need depending on the kit you buy. Also fuel upgrades to support the power.
     
    Last edited: Jul 23, 2008
  3. EvilTwins

    EvilTwins I can't find my pulley! Established Member

    Messages:
    1,133
    Joined:
    Aug 13, 2007
    Location:
    St. John's, NFLD Canada
    And don't forget the Driveline/IRS upgrades as well!
     
  4. TRBO VNM

    TRBO VNM Authorized Vendor Authorized Vendor

    Messages:
    23,097
    Joined:
    Feb 5, 2004
    Location:
    Maryland
    boost controller as well and tuning...

    but for just the swap, the second post answers it and some parts may depend on the kit you go with. and the EGR isn't a requirement for the kit, just an option if you want to retain it.
     
  5. SVTGT

    SVTGT Member Established Member

    Messages:
    107
    Joined:
    Aug 11, 2007
    Location:
    ERIE Pa.
    Truth be told. the drivetrain is in a foxbody that i set up for road racing. it have a full maximum motorsports front suspension and the irs/T56 will be upgraded accordingly. and the engine is being conrtoled by a Big Stuff 3
     
  6. TRBO VNM

    TRBO VNM Authorized Vendor Authorized Vendor

    Messages:
    23,097
    Joined:
    Feb 5, 2004
    Location:
    Maryland
    you will need a different kmember if you go with the hellion kit, unless you bought the hellion/MM version. Or unless you are planning a custom kit, which sounds like you might be. should be a great project and car when done.
     
  7. SVTGT

    SVTGT Member Established Member

    Messages:
    107
    Joined:
    Aug 11, 2007
    Location:
    ERIE Pa.
    ya it will be quite the custom kit the plan was originally for a big twin screw but my buddys TT WS6 changed my mind.
     
  8. Woodys2000

    Woodys2000 Run 9's or STFU Established Member

    Messages:
    354
    Joined:
    Feb 22, 2003
    Location:
    Fayetteville, N.C.
    Good luck man IMO there is nothing like a sick Foxbody!!
     

Share This Page