TRE 60lb EV1 Fuel Injectors - Bosch/Siemens Deka IV Style

97CobraDHP

Member
Established Member
Joined
Oct 21, 2017
Messages
72
SOLD!

This is a set of 8 TREperformance Thin Body Bosch Style 60 lb/hr high resistance, saturated fuel injectors. These have EV1 electrical connections and an upgraded single fuel delivery nozzle for superior fuel atomization.

Typical Flow Rate in LB per hour: 60 LBS/HR @ 45 PSI
Typical Flow Rate in CC per minute: 630 CC/min @ 45 PSI

These High Resistance(Approx. 10 OHMS) Saturated fuel injectors will fit many applications, including, but not limited to:

BMW 5, 6, 7, and 8 Series V8 Models
BMW M5, X5, Z8, and Alpina B7 Models
Chevrolet Camaro, Caprice, Corvette and Impala
Chrysler, Dodge, and Jeep HEMI and SRT8 V8 Engines
Ford Mustang GT, lx, Cobra 5.0L and 4.6L
Lotus Esprit
Pontiac Firebird, GTO, and TransAm

Any BMW 8 cylinder model with Bosch EV1 or EV6 style injectors
Any Ford V8 Engine with Bosch EV1 or EV6 style injectors

Specifications
Typical Flow Rate in LB per hour: 60 LBS/HR @ 45 PSI
Typical Flow Rate in CC per minute: 630 CC/min @ 45 PSI
Actual flow rate of your injectors may vary, but will be matched together
Resistance: 10 ohms (High Impedance, High Resistance)
Voltage: 8-15 Volts, nominal 13.5 Volts
Amperage: 1.0 Amps
Pressure: Min 30 PSIG / Max 100 PSIG
O-Rings Included: Yes, on the injectors
Injector Body Design: Metal and composite plastic
Fuel Delivery: Upgraded single fuel delivery nozzle for superior fuel atomization
Electrical connector type: EV1 (Minitimer, Jetronic)
Overall Length: 2 7/8 inches, 74 mm
O-ring to O-ring Length: 2 1/2 inches, 63 mm
Diameter: 16 mm
Orings: Top and bottom, 14.5 mm
 

Attachments

  • IMG_3379.JPG
    IMG_3379.JPG
    194.8 KB · Views: 74
Last edited:

Users who are viewing this thread



Top