I got rejected after going through inspection the first time after installing new cats on the car. The reason was that the OBD report read that the cats and one other thing were "not ready". at the time I was on an SCT tune and figured either the cats were disabled in the tune, or I just havent put the correct amount of miles on the car yet. Everything else came up as ready. To play it safe i decided to go with the "return to stock" option with the tuner just so I know the computer is back to factory and everything is being read and all the monitors are turned on. About 50 miles later on a stock factory tune I went back and every single category came up as "unsupported". The DMV people said I should put more miles on the car and come back again. Another 200 miles later it still reads "unsupported" in every OBD category. This has me very confused considering that the SCT tune seemed close to normal while the completely stock tune is now the one giving me problems. The DMV systems aren't reading the computer and I dont know what to do now. The car is 100% street legal now and the computer is back to stock yet instead of "not ready" signals im getting unsupported results all across the board. There are no check engine lights or codes and the car is running perfectly fine too. What can the issue be? should i put the SCT tune back on since that atleast gave me ready and not ready results? any help would be greatly appreciated. Thank you.