It's been damn near 8 months but I finally have the TVS installed and tuned. On black friday I got an amazing deal on a VMP Stage 2 kit, I ended up getting 25% off the entire kit and could'nt pass it up. I ended up selling some of the parts that came with it and made my own custom kit with parts I thought would go well together. The set up consists of a PMAS 120mm intake, VMP Twin 67mm TB, VMP Gen 2R TVS w/82mm, ID 1050 Injectors, JMS BAP, TSS OPG and Sprocket, Kooks 1/3/4 Longtubes w/O/R/X, stock resonators feeding into 13/14 GT500 mufflers.
I have to thank my good friend Jason Roth over at Competition Speed and Sound here in Southern Maryland, his username on here is @TRBO VNM. If anyone near Maryland needs parts or work done hit him up, his prices cant be beat. Hes well known in the Terminator section which is where I met him 6 years ago. I couldnt of done the install with out him and greatly appreciate letting me use his shop and for his help with the install.
As for tuning @Shaun@AED was awesome to deal with as always. Took a little longer to get it dialed in since my front o2s were acting up and I had to get new ones. Each revision he made car the drove smoother and pulled a little harder. Was doing my final revision pull this morning and I could'nt of been happier with how smooth the car drove under part throttle conditions. On top of that for running 93 octane the car pulls pretty good all the way up to 7700! Thanks Shaun and Jason, its vendors like both of you that enable us to get the most out of these Coyotes!!
Here are a couple of pics of the install and one of the car (wife took an awesome shot of the car and I had to throw it in).
[url=https://www.flickr.com/photos/154139920@N02/]
[url=https://flic.kr/p/26LPQ8g]
[url=https://www.flickr.com/photos/154139920@N02/]
[url=https://flic.kr/p/289pSrP]
[url=https://www.flickr.com/photos/154139920@N02/]
[url=https://flic.kr/p/289pQHD]
[url=https://www.flickr.com/photos/154139920@N02/][/url][/url][/url][/url][/url][/url][/url]
I have to thank my good friend Jason Roth over at Competition Speed and Sound here in Southern Maryland, his username on here is @TRBO VNM. If anyone near Maryland needs parts or work done hit him up, his prices cant be beat. Hes well known in the Terminator section which is where I met him 6 years ago. I couldnt of done the install with out him and greatly appreciate letting me use his shop and for his help with the install.
As for tuning @Shaun@AED was awesome to deal with as always. Took a little longer to get it dialed in since my front o2s were acting up and I had to get new ones. Each revision he made car the drove smoother and pulled a little harder. Was doing my final revision pull this morning and I could'nt of been happier with how smooth the car drove under part throttle conditions. On top of that for running 93 octane the car pulls pretty good all the way up to 7700! Thanks Shaun and Jason, its vendors like both of you that enable us to get the most out of these Coyotes!!
Here are a couple of pics of the install and one of the car (wife took an awesome shot of the car and I had to throw it in).
[url=https://www.flickr.com/photos/154139920@N02/]
[url=https://flic.kr/p/26LPQ8g]
[url=https://www.flickr.com/photos/154139920@N02/]
[url=https://flic.kr/p/289pSrP]
[url=https://www.flickr.com/photos/154139920@N02/]
[url=https://flic.kr/p/289pQHD]
[url=https://www.flickr.com/photos/154139920@N02/][/url][/url][/url][/url][/url][/url][/url]