Has anyone installed one of these on a 99 or newer cobra? I have attempted to install mine but it does not look like it is going to line up. Thanks for any info or advice.
Ed
Ed
snkbit99 said:The bolt holes line up. Did you have to move the ground strap mount on the left side and the brake lines on the right side? I am going to pull the motor mounts and see if that helps.
Thanks
Ed
saleenfiend17 said:Well i Plan on doing the swap
this will be good to know.
A LIST OF THINGS TO KNOW ABOUT UPR K MEMBER SWAP
1. Brake Lines Must be bent
2. Powersteering Rack and Pinion Bolts need to be replace with shorter bolts
3. Stock Struts do NOT work
4. Ground Straps need to be moved
5. Mounts dont work completely correct
please add on.. because i plan on this swap.
saleenfiend17 said:Well i Plan on doing the swap
this will be good to know.
A LIST OF THINGS TO KNOW ABOUT UPR K MEMBER SWAP
1. Brake Lines Must be bent
2. Powersteering Rack and Pinion Bolts need to be replace with shorter bolts
3. Stock Struts do NOT work
4. Ground Straps need to be moved
5. Mounts dont work completely correct
please add on.. because i plan on this swap.