well i did it need some help

[elmo0244]

i took my blower off today and i broke two i/c bolt's :bash: where can i get some new one's?also on the egr it didn't seem like there was to much of a gasket there should i get a new one or put some sealant around it?in all in all it wasn't that hard of job. :beerh yeah what is the deal with the hole in the lower intake with oil in it?

 

[elmo0244]

anyone? :shrug:

 

[dougwg]

I see in your sig that you are sending your blower to Stiegemeier, they can get you new screws

As far as the oil... don't worry about that... it's normal

 

[YGETV8]

Look again at both the blower and the EGR housing that bolts to it...the gasket should be stuck to one or the other of them. You can get new EGR gaskets at Autozone.

 

[YGETV8]

Oh yeah, what doug said: plenty of oil in there thanks to our PCV systems!

 

[CobraBob]

Like Doug said, Stiegemeier can get you new bolts, and remove the broken ones if necessary. I know Apten was supplying all new bolts with their ported blowers (great thing to do!) so check to see if Stiegemeier does the same thing.