Specifically looking at the rear tire set-up on the car below, this is a 295/35 Nitto Invo on a 10" Alcoa, it may be a little too much tire bulge for the front.......
..............whereas this picture below, that I previously added in this discussion shows a Toyo R888 in a 285 on the front of a 2011 MGT mounted on a 10" wheel and the sidewall is relatively flat, which is what is wanted to keep the tire in an acceptable profile with the fender lip and most importantly so that the tire does not contact the strut....BUT, I have read that R888's or more recent versions of the same have road noise concerns?......so then the car might sound like a 4X4 coming down the road?
R
..............whereas this picture below, that I previously added in this discussion shows a Toyo R888 in a 285 on the front of a 2011 MGT mounted on a 10" wheel and the sidewall is relatively flat, which is what is wanted to keep the tire in an acceptable profile with the fender lip and most importantly so that the tire does not contact the strut....BUT, I have read that R888's or more recent versions of the same have road noise concerns?......so then the car might sound like a 4X4 coming down the road?
R
Last edited: