Wondering how much boost on 10.3.1

blown97gt

New Member
Established Member
Joined
Apr 15, 2006
Messages
30
Location
st louis mo
My new setup im planning on 10.3.1 static compression. With my cams it will put my dynamic at 9.0.1... Can i run 12-14 psi on 93 oct and meth.....
 

itSSlow98

Active Member
Established Member
Joined
Oct 6, 2008
Messages
2,913
Location
Abingdon, Md.
Depending on the amount of meth and mixture you should be able to run 20psi+ on 93 and a dual nozzle 100% meth setup.
 

blown97gt

New Member
Established Member
Joined
Apr 15, 2006
Messages
30
Location
st louis mo
Depending on the amount of meth and mixture you should be able to run 20psi+ on 93 and a dual nozzle 100% meth setup.

Really so starting of with 12-14 on 93 and meth should be more then safe.. Right now i have a dual AIS 5 nozzles. And have timing being pulled at 105* as it never seen over 96* ict on a hot day... Cool i need to order pistons soon.....
 

itSSlow98

Active Member
Established Member
Joined
Oct 6, 2008
Messages
2,913
Location
Abingdon, Md.
I have dual 12gph nozzles on an AIS progressive controller. My tuner was fine going 24psi on 10:1 with a turbo. We never pushed it over 16 because the clutch acted up.
 

jymboslice

Rookie
Established Member
Joined
Mar 17, 2011
Messages
2,711
Location
US
what type of power adder do you have?


You shouldn't have any problems running 15-20 psi of boost with meth. Just make sure every cylinder is getting the same amount of meth.
 

blown97gt

New Member
Established Member
Joined
Apr 15, 2006
Messages
30
Location
st louis mo
procharger d1sc... Im going to be running the victor jr intake so i hope all will get meth.. Im told it should flow night and day over the stock pi
 

Users who are viewing this thread



Top