WTT SRA for 03/04 Cobra IRS complete

[me32]

I have a 2004 Mach 1 Solid Rear end Complete with with 20k miles on it. it has stock 3.55 gears in it, with brand new Super Alloy upgraded Axel installed an brand new wheel bearings(never been driven since installed). it will be a complete trade that comes with all bolts an hardware, tokico shocks an quad shocks with Eibach rear springs. rear sway bar with stock UCA an LCA and pinion snuber. ready for a direct swap. let me know if anyone is interested. i will have pics up tomorrow. also the Rear is already out of the car an ready to go.

thanks
allen

 

[me32]

still looking for trade an wuill help with the swap. it very easy

 

[racebronco2]

Interested in the swap for a friend. Are the axles 31 spline. His irs has about 30,000 miles on it. I am in the middle of rebuilding the engine. I will need to keep the pinion and flange to match his driveshaft. Are the brakes and rotors the same as the cobra's, i know the fronts are the same.

 

[me32]

Interested in the swap for a friend. Are the axles 31 spline. His irs has about 30,000 miles on it. I am in the middle of rebuilding the engine. I will need to keep the pinion and flange to match his driveshaft. Are the brakes and rotors the same as the cobra's, i know the fronts are the same.

its still 28spline, same here i would need to keep the Flange to bolt to my drive shaft. the brake setup is the same so keep your brake setup

 

[me32]

SRA is gone