Built Motor!!!!!!!!!!

[ported 04]

Well i took my car into the shop because of it's ticking issue. This is what i'm having them do.

JE 0.20 over pistons/rings 17cc 4v
Fedral Mogul Rod/Main bearings
ARP Main studs
FMS oil pump
Billet Oil pump gears
ARP head stud kit 12point
Head gasket, intake,exhaust, frt cover
Valve job 4v
head cooling mod
check chain, guides, tensioners
Custom Tune w/Dyno/Wideband
Bore&Hone wplates, Balance, hang pistons, polish crank, clean &
polish block, assemble short block

PICS ON PAGE 4

 

[SLEEPERSTATUS]

thats going to be great! if you can financially handle the extra 500 for the heads, do it

 

[Lights of Speed]

go ahead and get them ported while your at it if you have the cash, and congrats! i feel much safer driving the hell out of my car with a built motor!

 

[ported 04]

Yeah i'm probably having them port the heads...I don't really have the money to do it, but oh well. haha. I can't wait to drive it!!!

 

[iBiTe03]

i port the heads also while they are off.. you will regret it if you dont

 

[HISSMAN]

I wouldn't go .20 over on the block unless you have to. That way if the shit hits the fan, and you damage the cylinders down the road you can just have it bored out at that time instead of buying a whole new block. JM.02

 

[boosted2000si]

Good luck with those JE Pistons....

 

[iBiTe03]

i would of went with diamond

 

[ported 04]

^JE is what my builder recommends. :shrug:

 

[HISSMAN]

Diamond FTW!

 

[iBiTe03]

^JE is what my builder recommends. :shrug:

hmmm, just tell him you feel more comfortable with diamond pistons, he'll understand. :thumbsup:

 

[ported 04]

I'll ask them about diamond and see if they can do those instead of JE.

 

[image]

Whos doing the work?

 

[ported 04]

^Houston Performance

 

[Smacked_in_ATL]

Diamond on CP are what I'd use if I ever rebuilt.

 

[iBiTe03]

I'll ask them about diamond and see if they can do those instead of JE.

if you did a search (if it was available) on built motors, you find a lot more people using diamond.

 

[image]

id port the heads

 

[Posi]

Why not Ford GT cams instead of the ported heads? Now is the time if you're ever wanting to do it.

 

[03cobra#694]

Lots of things I could quote!
Diamond FTW
Cams.Read This



http://www.svtperformance.com/forums/engine-tuning-214/571512-gt40-cams.html






I agree w/HISSMAN on the overbore.

 

[Posi]

Okay then if you aren't going to push over 700hp then why port the heads. They just aren't needed unless you're going to go for big power.