Well, I've been working on the window motors off and on for a week now and it seems that there's a motor rotation sensor on the cuircut board inside the power motor housing. I'm now in search of the passenger side power window motor because I need the motor attached to the housing. The way I'm going to wire it is going to be like the one on the left.
Also working on putting steering rack limiters. This can work for power steering racks as well. These flaming river steering racks are aftermarket and allow the wheels to turn further than stock which is a problem. Made these spacers out of 1" pvc pipe. My proto type was on the larger side (7). I made 6 more in varying smaller sizes.
Also working on putting steering rack limiters. This can work for power steering racks as well. These flaming river steering racks are aftermarket and allow the wheels to turn further than stock which is a problem. Made these spacers out of 1" pvc pipe. My proto type was on the larger side (7). I made 6 more in varying smaller sizes.