Still kinda new here and would like a tutorial with some of the abbreviations used around the forum.
I've dealt mostly with 60's muscle so I throw around things like M22, 427BB, 12 bolt posi, pop-ups, you get the idea.
I could not find a thread like this under search so, here we go.
What prompeted this is that a member was kind enough to offer some advice for me and I am ashamed to say, not really sure what the abbreviation meant.
I know some, help me with the rest and PLEASE add on to the list!
And BTW, I did figure out one of the abbreviations over on the pic/video buffett. PIITB, which BTW, my wife still will have no part of!
(OK This is Jimmy, I have edited this thread and will continue to add as we go. I decided instead of stick the thread itself, I put a LINK to this thread in a pre-existing sticky)
AFAIK = as far as i know
AM = American Muscle
BAP - boost a pump (Kenne Bell)
BAS - Boost A Spark ( ll ll )
BF = BilletFlow http://www.billetflow.com/
BF IRS brace= BilletFlow brace http://www.billetflow.com/irs_brace.htm
BF IRS brackets = Improved "Mathis style" IRS sub frame brackets http://www.billetflow.com/IRS_Brackets.htm
BTW = by the way
CAI - cold air intake
CB- Cat back
CCRM - Constant Control Relay Module
CC - caster camber plates
C/O- Coil Overs
COP - Coil on Plug
DMM- Digital Multi Meter
DOHC = dual overhead cams
EGR - exhaust gas recirculation
FPDM - Fuel Pump Driver Module
FL = full length
FLSC - full length subframe connectors.
FRPS - Fuel Rail Pressure Sensor
FTBR- Full Tilt Boogie Racing (the best IRS bushings on the planet) http://www.fulltiltboogieracing.com/
GWSFC - Global West Sub Frame Connectors
HCM - Head Cooling Mod
HE - Heat Exchanger
IAC - idle air control
IAT - intake air temperature
IC= intercooler
IIRC- If I remember correctly
IMHO = in my humble/honest opinion
IMO = in my opinion
IMHO = in my honest opinion
IMRC- Intake Manifold Runner Control(used on 96-98 B head Cobras, not Terminators)
J/K - Just Kidding
KB- Kenne Bell
LCA - Lower Control Arm
LP = Lethal/Lethal performance
LPW- cover = http://www.lpwracing.com/Ultra_IRS/Ultra_IRS.html
LT = Long Tube
MAF - Mass Air Flow (sensor)
MIL - Malfunction Indicator Lamp
MM- Maximum Motorsports
MMFLSFC- Maximum Motorsports Full Length Sub Frame Connector
NM - Never Mind
OBD II -on board diagnostics
OP- original poster
O/R X- Off Road X Pipe
PATS- Passive Anti Theft System
PHB = Panhard Bar
PPRV - parallel pressure relief valve
PTW - Piston To Wall clearance
RSD - Rear Seat Delete
SBTB - Single Blade Throttle Body
SC = supercharged/supercharged
SFC - sub frame connectors
SRA - solid rear axle
TA - Torque Arm
TB- Throttle Body
TOB- Throw Out Bearing
TPS - Throttle Position Sensor
TT = Twin Turbo
TS - Twin Screw
UCA - upper control arm
WOT - Wide Open Throttle
WTF - Whiskey Tango Foxtrot
http://www.svtperformance.com/forums/terminator-talk-229/810249-terminator-color-acronyms.html
PIITB- put it in the butt
I've dealt mostly with 60's muscle so I throw around things like M22, 427BB, 12 bolt posi, pop-ups, you get the idea.
I could not find a thread like this under search so, here we go.
What prompeted this is that a member was kind enough to offer some advice for me and I am ashamed to say, not really sure what the abbreviation meant.
I know some, help me with the rest and PLEASE add on to the list!
And BTW, I did figure out one of the abbreviations over on the pic/video buffett. PIITB, which BTW, my wife still will have no part of!
(OK This is Jimmy, I have edited this thread and will continue to add as we go. I decided instead of stick the thread itself, I put a LINK to this thread in a pre-existing sticky)
AFAIK = as far as i know
AM = American Muscle
BAP - boost a pump (Kenne Bell)
BAS - Boost A Spark ( ll ll )
BF = BilletFlow http://www.billetflow.com/
BF IRS brace= BilletFlow brace http://www.billetflow.com/irs_brace.htm
BF IRS brackets = Improved "Mathis style" IRS sub frame brackets http://www.billetflow.com/IRS_Brackets.htm
BTW = by the way
CAI - cold air intake
CB- Cat back
CCRM - Constant Control Relay Module
CC - caster camber plates
C/O- Coil Overs
COP - Coil on Plug
DMM- Digital Multi Meter
DOHC = dual overhead cams
EGR - exhaust gas recirculation
FPDM - Fuel Pump Driver Module
FL = full length
FLSC - full length subframe connectors.
FRPS - Fuel Rail Pressure Sensor
FTBR- Full Tilt Boogie Racing (the best IRS bushings on the planet) http://www.fulltiltboogieracing.com/
GWSFC - Global West Sub Frame Connectors
HCM - Head Cooling Mod
HE - Heat Exchanger
IAC - idle air control
IAT - intake air temperature
IC= intercooler
IIRC- If I remember correctly
IMHO = in my humble/honest opinion
IMO = in my opinion
IMHO = in my honest opinion
IMRC- Intake Manifold Runner Control(used on 96-98 B head Cobras, not Terminators)
J/K - Just Kidding
KB- Kenne Bell
LCA - Lower Control Arm
LP = Lethal/Lethal performance
LPW- cover = http://www.lpwracing.com/Ultra_IRS/Ultra_IRS.html
LT = Long Tube
MAF - Mass Air Flow (sensor)
MIL - Malfunction Indicator Lamp
MM- Maximum Motorsports
MMFLSFC- Maximum Motorsports Full Length Sub Frame Connector
NM - Never Mind
OBD II -on board diagnostics
OP- original poster
O/R X- Off Road X Pipe
PATS- Passive Anti Theft System
PHB = Panhard Bar
PPRV - parallel pressure relief valve
PTW - Piston To Wall clearance
RSD - Rear Seat Delete
SBTB - Single Blade Throttle Body
SC = supercharged/supercharged
SFC - sub frame connectors
SRA - solid rear axle
TA - Torque Arm
TB- Throttle Body
TOB- Throw Out Bearing
TPS - Throttle Position Sensor
TT = Twin Turbo
TS - Twin Screw
UCA - upper control arm
WOT - Wide Open Throttle
WTF - Whiskey Tango Foxtrot
http://www.svtperformance.com/forums/terminator-talk-229/810249-terminator-color-acronyms.html
PIIHB- put it in her butt
PIITB- put it in the butt
Last edited by a moderator:
