Kenne Bell 2.2 Dyno Numbers List

[semc1913]

2.2 2nd gen
3.0" upper
Stock lower
17lbs
91 oct
Mile high elevation

587 hp
543 tq

 

[laruei]

Finally got my numbers!

Video here: My 2.2 KB Installation. (Full Video) - YouTube

2.2 2nd Gen
3.0" Upper
Stock Lower
17lbs
91 Octane
Socal on a 60 degree day.

608/552 (98% duty cycle on the stock pumps ftl) uncorrected btw.

 

[quick88lx]

best cobra/build vid ever. great job man

 

[laruei]

best cobra/build vid ever. great job man

Wow thats a huge compliment!! Thank you man.

Its not over though :rockon:*insert sinister laugh*

:beer:

 

[Krs One]

Krs One.....2.75 / Stock.............19psi.........e85.....670/585

 

[laruei]

My e85 numbers:

2.2 2nd Gen
Stock Lower
19lbs
E85
Socal on a 60 degree day.

650/615

Video: [youtube_browser]Fb30wymQjZ0[/youtube_browser]

 

[ZOSO]

I just picked this up. pulley combo is 3.1 upper 4lb lower. Saving the money for a new fuel system and hoping to turn over 600rwhp on e85. Should be about a month before it's done. Also wanna add a killer chiller if I can get my a/c fixed.

 

[Krs One]

I just picked this up. pulley combo is 3.1 upper 4lb lower. Saving the money for a new fuel system and hoping to turn over 600rwhp on e85. Should be about a month before it's done. Also wanna add a killer chiller if I can get my a/c fixed.

If you have the supporting mods you should be able to do 600 on pump 93 @ 19lbs, I did 608hp before the e85 swap.

 

[ZOSO]

up here in denver i'll see a loss of psi. I'll probably only be around 16-17psi. Im gonna install it and run it on 91 for awhile until I can do a new fuel system.

 

[SlowImport]

3.4 upper
8lb lower
18 psi
632/586
91 and torco

 

[Krs One]

up here in denver i'll see a loss of psi. I'll probably only be around 16-17psi. Im gonna install it and run it on 91 for awhile until I can do a new fuel system.

That sucks you lose psi.

 

[Riddick]

Is it me or is the 2.2 putting out the same numbers as the bigger 2.6H?? I would think the 2.6H would out perform the 2.2 but a good amount.

 

[LordVader04]

3.25 upper
4lb lower
19 psi
93 torco
584/?
Auto trans

 

[laruei]

I bet that KB sounds different when the auto shifts... any vids? And damn that slush box takes some power..

 

[badazzebz06]

Just got my car tuned 22psi. 3.0/2lb lower torco 632rwhp

 

[justa03]

Damn 19 psi and 670 HP? That's impressive!

 

[Mystic03]

18lbs

650/600 mustang dyno 85* day

 

[Silverboost]

I think this thread proves that every dyno is different.....it would be interesting to see track numbers for everyone..

 

[Krs One]

Damn 19 psi and 670 HP? That's impressive!

Yeah, picked up 62hp over 93. It hits 20lbs in the last 500rpm but that's after max hp I believe so I don't really count it.

I think this thread proves that every dyno is different.....it would be interesting to see track numbers for everyone..

I know another guy with similar setup doing 665hp. It's on a mustang dyno if that helps.


Sent from my RAZR using Tapatalk.

 

[Mystic03]

^ you running a lower?