Got a t56 magnum xl in the boss right now with a D1sc and supporting mods. Looking to go auto with a built th400. Reverse manual valve body, trans brake, the whole 9 yards. Already have a guy that can build the th400. Doing the tci outlaw shifter and from what I've seen it fits pretty nicely in the stock manual shifter hole in the console. Also saw where the stock mt82 crossmember can be flipped around with a JPC mount and fits perfectly.
With that cleared up... I still need to figure out where to get a bell housing, flex plate, and how to wire the speed sensor so the speedometer will work... suggestions? Who's done the install? Can I use the bell housing adapter from the t56 swap? What converter are yall using? I'd like a lock up converter if possible. A gear vendors overdrive will be going in later down the road....
With that cleared up... I still need to figure out where to get a bell housing, flex plate, and how to wire the speed sensor so the speedometer will work... suggestions? Who's done the install? Can I use the bell housing adapter from the t56 swap? What converter are yall using? I'd like a lock up converter if possible. A gear vendors overdrive will be going in later down the road....