maybe it is somewhere, but what size rims are you running. nice work for sure!!!!!!!!!!!!!!
Those are 18” Saleen rims. Man I would love a set of those brackets to run them on my Cobra.
What was the total cost mooch?
Last edited:
maybe it is somewhere, but what size rims are you running. nice work for sure!!!!!!!!!!!!!!
This guy is right, OP, are you upgrading rear brakes too? The gen V vipers (non ACR) have a notorious brake bias where the rear end starts to wiggle under heavy braking.Are the V calipers pricey compared to Brembos? Also - if the front brakes are too big vs the rears it can affect your bias at the limit, so be careful.
Holy crap, OP... That is fantastic.
Thanks!Jesus, Mooch.
Constantly raising the bar.
Props, man. Looks ****ing fantastic. Every time I see the car it looks better and better. Keep up what you're doing man.
LOLOLI very mooch love your car.
I needed to run the tubular A arms for the brakes to clear when turning and modify the spindle.What is needed besides the bracket?
I did a few extra things such as stainless braided rear hoses and a bumpsteer kit and it all costed me just under $2kThat's impressive. What was the total cost for the swap?
I want to upgrade the rear brakes eventually too, not too sure if the stock master cylinder can handle it though, but I plan on looking into it soon.Are the V calipers pricey compared to Brembos? Also - if the front brakes are too big vs the rears it can affect your bias at the limit, so be careful.
See response aboveThose are 18” Saleen rims. Man I would love a set of those brackets to run them on my Cobra.
What was the total cost mooch?
I plan on looking into upgrading the rears at some point as well.This guy is right, OP, are you upgrading rear brakes too? The gen V vipers (non ACR) have a notorious brake bias where the rear end starts to wiggle under heavy braking.
I'm still on the fence about the V, I would like to find an overlay that just says brembo I thinkAwesome work. I also agree on painting them to get rid of the V. Or find a decal big enough to cover it?
Yea my wheels are still centered, I have the stock K member thoughDo the team z arms keep the wheels centered? One thing I hated about the k member I ran. Pushed the wheel centerline forward and out a bit. Corrected some of it with fox length stuff but it always bothered me.
Sent from my iPhone using svtperformance.com
Need more info on what you did to modify the spindles..