Recent content by mg02bullitt

alright, so i put 4.10 gears in my car, and while its on the lift i decide to put on some steeda control arms i had recently gotten. all went well except for during the first drive after. when i got on it there was a decent vibration coming from the rear. also going like anywhere between 45-60...

when i bought my car about 2 years ago, it had just been repainted minus the roof. i noticed it had some orange peel and some dry spots in the clear coat. i never really got around to attempting to fixing these. my question is now that the clear is now cured completely hard and 2 years old, is...

Ok so I'm in the process of kind of building my car, and i decided to go with the 03-04 cobra tank setup. I came across a good deal and couldn't pass it up. The only thing is, is that it has 2 walbro 255's, and a dual FPDM harness and FPDM's themselves with it. My question is, how do i get...

hey i was wondering if anyone new what the stock oil pump can handle...i'm gonna be around 500 to the wheels...i've read as long as the rpms aren't insane they can handle a decent amount. i just don't want my motor to blow again after the rebuild. any input or ideas would be appreciated! thanks

alright, i know this has been discussed but i can't seem to find anything back. But what needs to be done to put the twin cobra pumps in a gt tank? i've read you remove the baffle, but then you can't run the tank lower than a certain level. and i've also read that you can drill holes in specific...

Alright, when im done with my car, im planning on at least 500 hp to the wheels. My question is, will a focus pump handle this? im pretty sure it wont...so i was thinking of putting a kenne bell BAP on it. would this be enough? and what do people mean when they put in a 40 amp fuse with the...

does anyone know what the max horsepower level for headers with 1 5/8" tubes and a 2 1/2" collector is? im hoping for 500 to the wheels when im done with my car, and am wondering if i need to shell out the cash for bigger headers or not. Any help or opinions would be appreciated! thanks!

sorry if this is an obvious question, but will a stock 2v harmonic balancer work with an aluminum flywheel? id have a forged crank too if that matters...any input on what people are using would be appreciated! thanks!

I just bought a crankshaft thats supposedly out of a 1998 cobra. I come home to open the box, and its heavy as hell! i was thinking these would weigh like 20 pounds...are they that heavy or did i get screwed??

a buddy of mine has original chrome 03 cobra wheels on his car. he wants to get 10.5's in the rear. these would obviously be aftermarket, and we we're wondering if the chrome would be exactly the same or not? thanks

Alright, so i get my P1sc kit on, get the chip in, she runs for a day and ****ing blows up. So I'm pissed and am gonna just build it lol. So my question is, if I have a 3.85 pulley running 8 lbs. what would a 3.0 pulley give me? i was guessing maybe 14? And would it be wise to upgrade to a...

Ok, I got a procharger for my car, and everything is going good, except when we put the chip on the computer and turn the key forward, the fan turns on and the car wont start. I sanded the connection fairly well, so i'm not sure what the problem is. Do i need to sand more? Or does the chip...

Alright, i will soon be buying a p-1sc kit for my car, and i want to put on procharger's race bypass valve, or possibly a blow off valve. My question is, is this kit a blow-thru, or draw-thru kit?? and where would i mount the bypass valve? or how can i swap to a blow off valve?? thanks a lot!

Ok, i tried searching, but no one seems to have this problem. When my car is to the floor, after about 4800 rpms, it seems like the rpms climb REALLY slow. I changed the plugs, cleaned the MAF, and changed the fuel filter prior to me noticing this problem, so I've ruled those out. I don't...

Are these worth the money? Has anyone heard any good/bad things about them? My car has a slight miss, and I'm gonna change the plugs, so i figured i might as well change these too.