Search results

So i screwd up tonight and sprayed my pass valve cover with B-12 Chemtool not thinking about coating and it started to peel inside and out.... so i have a few questions I sure hope yall can answer! How hard is it to take driver side valve cover off without touching hydro booster?? Or can it...

So iv looked for info about the signature plaque on my 99 Cobra pass side valve cover, with no luck for awhile. I finaly came across a site to buy a unstamped plaque for a steep price. My question Is how do you get these plaques stamped/ingraved or can it even be done?? I have a stamping...

Looking to buy 96/98 Cobra intake cams for my 99cobra rebuild, if anyone has em layin around and thete in good shape let me know. Also eould buy stage two comp cams anyone got those laying around?

1999 Cobra 136kmiles, straight line friday night/ weekend car, Time for rebuild, mods as listed BBK CAI, BBK 65MM TB, 90mm MAF, ported intake, accel packs, BBK LT Headers, BBK O/R H, 4:10 gears, short throw, SCT Hand Held. Im staying NA FOR SURE. i plan on rebuilding the heads as in new...

99 cobra, on a cold start up coming from the tail pipes a deep thump occurs every so often untill the car warms up. Think of a constant roar of the exhaust and every so often in no pattern a deep but softer thump will occur. If that makes since. I have stock cams an there is no ghost cams in my...

So when i First bought my cobra a few months ago one of the first things i did was change the oil. I used 5/w30 Royal Purple and a new K&N oil filter and maybe a 1/4(if that)of a bottle(small bottle not the big bottle) of marvel mystery oil. Not even 250 miles later i change it to Mobile One...

So i changed my oil today on my 99 cobra. I drained the oil and then started to take off the filter, as i was doing so a bit of coolent ran out from the filter(green liquid. No oil was running out at the time the coolent ran out)That should not be happening right???

So i "sea foamed" my motor today but instead of the highly over rated SeaFoam i used Berrymans full fuel system cleaner. Everyone talks about lots and lots of smoke and a odd smell some people have said well......... i got niether one of those, no smoke no smell. My question is did i do it...

So iv been reading up on some older post about changing valve cover gaskets on 99 cobras. Some people have said you need to lossen your motor mounts to remove the covers. Is this true? I only really need to change the driver side gasket And that side looks the easiest. Only reason i need to...

So im limiting myself to a $1000 budget, im looking to upgrade/install parts on my Cobra. So far i have BBK LT, BBK 65MM TB, BBK CAI, BBK off road H, flows 44 cat back, 4:10s, NT05s, accel packs ngk plugs. I mostly run 1/4 miles with the car, Its not my DD. What would be a great upgrade for...

Im changing the plugs and packs on my cobra. I figured i might as well check the compression on each cylinder while i was doing it. What should the pressure be in the cylinders(what was the pressure in the cylinder right off the show floor)? Or does that not even matter aslong as there all...

So im in need for new tires, im stuck between the Toyo R888 and Nitto NT05 both have great reviews both seem like awesome tires. I just want to see what you guys and girls have to say. Please help!!

Hey everyone, i need help pickin out a good tire for my 99 cobra. I would like to run 295/35/r18s if i can. Its not my daily driver but i do drive it back and forth to the strip. And every now and then ill take it on the back roads. Im running 4:10 gears so i need somthing that will hook and not...

Whats The widdest tire i can run on 18x9" wheels with/without the Irs bolt mod. Car is not lowered, tires are going on rear wheels not front. I have 245/40r18 on front and back as for now. The 245s spin thru mid 3rd gear launching around 2500/3000 rpm with 4:10 gears

My output shaft seal is shot, leaking fluid all over my drive shaft. Can anyone give me any tips or maybe a step by step on changing the seal? Been to a couple of shops and the cheapest one quoted me $200.i tryed reading up on it the only thing im worried about is the DS vibrating after install.

Back drive side break was leaking at crush washer. Replaced both crush washers on both sides of bolt, bleed break line and is still leaking now, even worse than befor? They were the same size crush washers as i took off. And i cant get the bolt any tighter. Any tips or somthing i missed or...

Back drive side break was leaking at crush washer. Replaced both crush washers on both sides of bolt, bleed break line and is still leaking now, even worse than befor? They were the same size crush washers as i took off. And i cant get the bolt any tighter. Any tips or somthing i missed or...

Just bought a 99 cobra 130k on her. While doing routine work i noticed there was oil/fluid on under body where tranny and drive shaft meet, oil/fluid has been slung every where by the shaft spinning. I need help to go about how to fix this or maybe why it could be leaking?? Please anyone

Im new to the forum and to owning a cobra. Cobra has 130k on her, just did all routine work such as oil/filter, coolent flush, rear end oil, fuel filter, took of MAF, TB, Plenum, Intake, & injectors and cleaned them all real good. Wondering if im missing anything besides the tranny? If so...