Hi guys, just received my EGR delete plate from Sprayitracing.com , shipping was VERY fast even for me here in the Caribbean! :rockon:
So planning to do this, I couldn't find the "how to" to disable the EGR value / parameter in a Diablo Predator. Does any1 have some more info on this...
So I got my kit from LFP, came with everything I ordered. Now it's time to put the #4 lower on. I started looking into it this weekend but don't have all the necesary tools to do the change. Apart from reading the procedure and looking in the "how-to" section, does anyone have some more detailed...
Hey all,
Last night after work I finally got up and installed that thing. It was pretty straight forward install. I disconnected my battery first, then removed the old intake elbow, maf and air intake box. I then continued on to assemble the new parts using the steel Power Tube and the new...
Ok I'm finally got all my parts ready to change the pully and install the chickenears cai. Since I ride a 2000L I also have the 90mm MAF. Will this be as simple as:
1. unplug the battery
2. remove stock intake
3. disconnect stock maf
4. put in new intake and maf
5. re-connect battery
6...
Hi all, had some bad luck a while ago. Some a-holes ripped my headlights off and cut the wires to strip my HID setup...damn bastards!
Anyhew I know they'll be getting what's good for them so I ordered my new stuff and it all finally arrived. My problem now is that the way they cut the wires...
Hi guys,
I have about 500 miles to go before I change my oil and I noticed this time again that it seems that the oil levels dropping to fast for my taste. It's still on the safe side, and I don't have any leaks but I'm just a bit concerned.
I'm running Mobil 1 10w-30 on my 2000L currently...
Hi guys,
I have my predator at home, plugged it in yesterday and all went smooth when running the diagnostics etc.
I'm still bone stock, I have the 4# pulley and plugs at home but did not had a chance to put them on yet. My question is this, can I run this tune "Non-pulley tune 93 octane...
Hi guys, I got my diablo predator finally. I read thru the manual so I'm comfortable knowing what to do when it's hooked up. Just wanted to ask if there's anything I would need to be on the lookout for when using it for the first time.
I'm planning to change the lower pulley soon and then use...
Hi all,
Finally a person here on the island bought a dynojet and installed it at his shop! As I was in need of a baseline anyway I went to pay the guy a visit. We strapped down the truck and of he went. Now remember it's a constant 85 to 90 degrees here, with a humidity of around 62%. I'm not...
Hi, i'm going to get the diablo power package now that I got the mod bug. While i'm doing that i'm going with the #4 lower, and a k&n intake. Now should i be upgrading the maf to a 90mm or will the stock 2000 be ok for this setup. I won't be modding the engine more, probably only exhaust but you...
Hi, what's the difference between these two models:
k&n 57-2548 for the 99-00 L
k&n 57-2549 for the 01-04 L
Except the pricing can one go wrong by buying the 01-04 model for a 2000 L?
Thanks
I'm wanting to upgrade the suspension on my 2000L, and am considering going with the Hotchkiss setup. Now I noticed on LFP there are 2 kits, the total kit or a kit without the swaybars. Are a change of sway bars really that necessary when lowering or is it ok to stay with the original ones...
I was looking to swap the stock MAF on my 2000L for a 90MM one and get a CAI. Now can I simply bolt on the new MAF, disconnect the battery to reset the ecm and hook it all back afterwards or is there more to this swap?
Thanks
Hi all, first off happy 2007 to you all and ur loved ones. Being from a small island in the Caribbean we look for cars, parts etc either in the US or Japan. But once they are brought here, we often have people from these countries looking at what we do with them! Here's a vid from a show that...
Hi all,
I've been following alot of the threads where there is talk about cleaning up the intercooler / supercharger. I need to do this but one thing is keeping me from beginning. I read that you will need to fill it up with the gm supercharger oil or if needed just half a bottle of your...
Ok got a question here regarding a piece which is connected to the control arm, I was driving around and everytime I pass over a bump I hear a noise like a washer is completely loose. I go underneath my L today after work to find out that whenever I bang on my stabalizer bar, the clining sound...
Anyone running a set of these headlights http://cgi.ebay.com/ebaymotors/FORD-F150-97-03-CHROME-HALO-PROJECTOR-HEADLIGHTS-LED-98_W0QQcmdZViewItemQQcategoryZ33710QQihZ012QQitemZ220049824818QQrdZ1
or a set of these...
Hi guys, I noticed lately that whenever I'm in reverse and put it back into drive, it takes a couple of seconds before it "falls into place". So if I were to back the car out of the driveway and put it in drive, the engine would rev up a little before I can take off. When driving it shifts...
Hi guys, whenever i'm driving around and I'm on the open roads it's all good but as soon as I get to a road where there are pot holes etc, there's a sound coming that's like a loose chain hitting somewhere on the frame of the truck. I checked underneath the truck but there doesn't seem to be...
Hi guys, i'm a 00 Red L owner and I really like the HID sets from CQLights. Problem is I have the original headlights and it will probably provide alot of glare. So on to fleabay we go and I found these...
I'm noticing alot of "power packages" on some of the sites we use to purchase our upgrades like lfp or rpmoutlet. I want to upgrade my pulley's but not sure about the various numbers available 2/4/6/8lbs. How do I know which one to go with if I'm looking for improved street performance. Not...
Hi all,
Like the title states, has anyone tried to make one of these fit on the L?? I own a 00 L, but I'm not sure if they have adapter kits for this one to fit. I know the material is sweet as hell to provide a good grip. Any info would help.
Thanks,
I noticed on buyfordracing.com that they are having an amazing sale on those wheels and I'm leaning towards getting a set. The only thing is I want to see if there's anyone here running them on their L. I already searched but unfortunately did not come up with any pics.
Hi guys, my transmission oil pan is screwing me over each day. The guy I bought the L from had some issues with the transmission and when I looked underneath the truck I could see that there were 2 weld spots on it. Ok so here's what I need:
The part number for the OEM Transmission oil pan...
Hi guys, I recently encountered myself in a situation where I needed to step hard on the brakes. When I could release and just step back on the gas, I noticed that the car would just rev up and stay there. It was in D but it's like there was a lock preventing it from going forward. Could this...