eaton

First post but I feel.. Lost? I recently got a Cobra a few months ago and to my surprise, completely stock. Right off the bat, we changed Oil, Trans oil, and Blower oil. Had the funds to mod her up a little as well (appearance mostly). I wasn't sure what the car was making before my tune but I...

Sold The stock Eaton off of my 03 cobra. Spins freely, never gave me any issues. Car had about 80k when it was pulled off. Just need to clear out some space, only asking 200 picked up. Happy to get you a shipping quote if requested. Adding a link to the wheels I am selling. Came off my...

I have acquired this blower and am giving up on buying an 03 Cobra but am trying to figure out how to tell if it's a Steggy or Posi port etc. It has a number on the front, but does not say Stiegmeier like some of the ones I have seen.

So i have a 99 cobra (terminator engine) built with diamond pistons, slightly higher compression. I recently started having an issue where it will be full rich 10.0 on the wideband. Cruise around and itll go back to 14.2-14.5 while cruising around, then ill apply a little throttle to get over a...

USED Reichard Racing Ultragrip 2.95 inch SC Pulley for Eaton. $75 + shipping. Located in Minnesota.

I have a 03 Sonic Blue Cobra and I need to get it dyno tuned.I live in the Milwaukee Wisconsin Area. Any suggestions on where to go? I also need my fenders rolled so any suggestions would be appreciated!

#SOLD# Not shown, but includes gasket. Very nice condition, paint is dead match to Eaton. $85 + paypal + shipping

My car is 1994 Cobra, engine from mach1 and I'm adding eaton m112 with partly selfmade swap parts (like Trilogy Motorsport set for Marauder) I'd need titles part shipped to Finland Europe, paypal in advance. I need at least the big hoses that connect to crossover. Picture from my engine

** Update ** Taking best offers. Reviving this for sale thread, taking best offers. Money got a bit tight with this Coronavirus. Half the fam was laid off so gonna also be putting up other things for sale on separate threads. Most of the parts 4 sale are from my Fox-Termi swap project that I...

New to owning a GT500 and couldn't find much on changing the oil in the supercharger, so I decided to do a video on it. Hopefully it will help out some other newbies.

The bearings in the front of the Eaton are starting to go bad. They are making quite a bit of noise. So the car has been parked for a few weeks now. Needless to say its killing me. :( I am 99% sure I can rebuild the snout myself. I have the kit that I bought from ZZ Performance. The belt...

I'm looking for a power adder for my Mach 1, nothing too crazy. I'd ideally like to get to around 430-450 RWHP on 91. Thanks to California I can't go with a Vortech or Procharger kit. I was thinking the only CARB legal solution would be to Eaton swap it and get it reffed? I'm not too sure...

So I am trying to purchase a POSI Ported Eaton off of someone, but two red flags went up. 1) I saw a photo of the plenum and it doesn’t look Ported. Weren’t all the plenums from POSI ported? 2) I’m not familiar with the way the POSI stamp/etching looks. Can someone verify if this is legitimate...

I have tuned my car with SCT Pro racer, and just converted my car to E85. I have full bolt-ons and a ported Eaton with 2.8 upper and 4 lower pulley, making abount 17 psi. I am woundering how the timing chart should look like, right now I am running the timing chart from SCT on race gas tune...

Hey guys, I was wondering if I could get some feedback on something I've found. I found a M112 blower with the throttle body, SVT manifold with built in intercooler, SVT tensioner bridge, green top SVT injectors, heat exchanger with fluid reservoir, upgraded crank pulley, heat exchanger pump...

Hi all, I am looking for an already ported, low miles, M122 blower preferably from either Posi or Stiegemeier. Let me know what you all have! Thanks.

Magnaflow exhaust, hand polished, $250.00 (sold) Ported Eaton, bought ported, not Stegmeier, 2.76 pulley, works great $650.00 Polished ACCUFAB TB & plenum, $350.00 (Sold) JLT cold air intake, dark shadow grey painted tube $200.00 Tinted tails,all sockets included $100.00 (Sold) Pro 5.0 shifter...

Sold. Please delete.

I have a Steggy stage6 ported blower I bought a few months ago, I plan to swap this weekend, --what do I need to swap it such as gaskets or torque to yield bolts etc etc??? What misc items will I need? --Where/how do you put oil in the stock blower? --Do u have to remove the lower intake...

Stock Eaton with 60k miles in perfect condition. Comes with Metco 2.8 pulley+hub, stock throttle body, stock elbow, and all bolts. - $400 obo buyer pays fees and I will cover shipping. SOLD! Stock 39lb injectors with 60k miles. Worked perfectly, no issues. - $80 shipped - SOLD! Stock FPDM -...

selling me mirror polished Stegmeier stage 7 ported eaton. Also looking to sell 58lb steggy injectors, mirror polished dragon plenum, Mods are 2.4 pulley Venom cooler Stage7 port Mirror polish Car made 517 on 58lb steggy injectors with sct preloaded tuning. Looking to get 1500 plus...

I have a Posi Race Ported Eaton on the car now and have a Stage 7 Steggi Hybrid (M122 rotors). I'm trying to decide if I should just swap the entire blower or swap the hybrid kit over to the Posi Port. Any thoughts?

Anyone have an idea what the Posi Race Port Eatons are going for? I have one I'm selling soon and was just curious since he isn't doing them anymore.

I have a Metco Pulley Puller and a Metco 2.70 Pulley/Hub kit. Both are still in the box and have never been used. Metco Pulley Puller - $95 Shipped Metco 2.70 Pulley/Hub - $90 Shipped *Prices are either before PayPal fees or PayPal sent as gift (no fee)

Hey guys. As you may or may not know I recently upgraded to a TVS on my Cobra. Here is a compilation video from the past year of the screaming eaton. Let me know what you think :)