rpm

  1. 9

    97 Cobra Weird rattle/metallic Shuddering noise between 2k-3k RPM IN GEAR

    Hello everybody, this is my first post and I'm hoping problems with SN95's still get attention even though I haven't seen many recent posts or threads about my particular problem, let alone proposed solutions to said problems. Anyways, I'm experience some sort of metallic rattle/shuddering...
  2. S

    GT500 randomly holding high idle?

    I have run into a problem with my 2010 GT500. I daily drive this car and have never had a problem with it but the other day I was driving at 2400 rpms and when I let off the gas, the rpms stayed at 2400. I pushed the clutch in, they did not drop. I had to turn the car off and it started up fine...
  3. CaliGT500524

    Vibration Issue

    Hi all, I've got a 2010 GT500 with about 60K miles on the car. I've been noticing a vibration that is both felt and extremely audible from outside of the vehicle. The noise is most prevalent in 3rd and 4th gear and usually at about 1800-2000 rpm under heavy load. I have only really noticed the...
  4. 0

    2001 Cobra Convertible Questions!

    Hello, I recently became the owner of a 2001 Cobra Convertible with 74k miles! It has been put up for awhile so I am having to get everything in tip top shape. The engine is running car drives and everything, however there are a few things that catch my eye and I was wanting to ask the masses...
  5. G

    hanging Rpm's

    so in between shifts my car hangs r's a little bit. not to bad but should be coming down a lot quicker. I cleaned the IAC valve but it still is doing it. any other suggestions ?
  6. G

    Hanging RPM's

    My mach is hanging rpm's in between shifts. need to fix this problem anyone have ideas??
  7. 9

    High Idle Troubles

    hey there fellow mustung guys.. i recently purchased a 98 mustang cobra as my first sports cars ive been into crotchrockets... Anyways..... when i pull up to a stop and take it out of first it wants to idle at 1,200-1,400rpm for about 5 seconds before dropping to 900rpm. at one point it...
  8. M

    low rough idle AND hanging RPMs

    I feel as if I’m dealing with 3 issues here; possibly related, but I am running out of signs to use for trouble-shooting. The first problem is a low, rough idle that sounds as if my ’04 cobra has a pushrod motor with a loping cam. The second problem, while I originally thought was independent...
  9. 95FordLightning

    Slowing Down a Lightning on Purpose

    I'm a new owner of a 1995 Lightning that I purchased for my son who is just starting to drive. Yeah, I know, I could have probably got him something a little slower. But he loves these trucks so much and I found a good deal on one with low mileage. What I'm trying to figure out is what some...

Top