2007 gt500 852rwhp 931rwtq

strongs_2009

Member
Established Member
Joined
Jun 5, 2010
Messages
197
Location
Daytona Beach FL
*********OFF THE MARKET********



After alot of thought about this I am putting it up for sale to move onto a bigger vehicle project I have in mind. This is a awesome car I have loved every min of owning it. Ok on to some of the mods.

Whipple 3.4 (25lbs boost) 3 pulleys
IW 10% lower
Whipple 160mm throttle body
Whipple cold air
Fore fuel rails
80lb injectors
Upgraded fuel lines
3 gt40 fuel pumps
Fore triple pump hat
Ported heads and lower intake by foxlake
Oliver Rods
Manley Piston (stock compression)
Spec stage 5 clutch
Cobra Jet and Ford lower springs
QA1 rear shocks
completely done Steeda suspension
Moser Fab 9 rear end
Alcoa rims (street) Bogarts (track)
Shelby 6 piston brakes (stock rear for track)
Snow stage 3 meth kit (all the upgrades)
NX nitros kit (75shot)
C2 guages
Line lock
WOT box (2step - no lift shift)

Theres a quick take on what on this. I have all the receipts to go along with it. I have the dyno sheet to prove the power and the dyno sheet and was for before the heads and lower intake was ported. But im asking $48,000 OBO. I will be posting it on Ebay in the next few days. It has around 9200 miles on it.

32570_119167178113579_1000006089239.jpg

1.jpg

l_7ea67b78ffcd4d42ac231f629e693a7d1.jpg

l_de8d8dcb4a9b47d7b9a9ec1782d5fdd41.jpg

5368_107311955686_502385686_2385244.jpg

l_7047135a0ff1429e9b24efc0b6b1d0071.jpg
 
Last edited:

skyhighsd

Active Member
Established Member
Joined
Apr 10, 2007
Messages
3,025
Location
over here
Bump it up for a very nice car and very well built. Man if I had to do it over again I would have waited and saved a ton of cash!
 

strongs_2009

Member
Established Member
Joined
Jun 5, 2010
Messages
197
Location
Daytona Beach FL
I know how you feel I been doing this car for a couple years now seens like something new is always coming out and needing to swap to something different. I started building this car with 43 miles on it 2 months before mustang week 2008 to have it ready for there. first i started with the TVS blower only used it for the first dyno tune and ordered the whipple. so yeah well worth the 5 grand. I have used a couple different type of injectors and so on. its been a expirence for sure. Hope the project that I am going to get started on here soon isnt such a bumpy road.
 

strongs_2009

Member
Established Member
Joined
Jun 5, 2010
Messages
197
Location
Daytona Beach FL
bb Fogot to mention.

Exhaust - Full bassini exhaust
Cams - ford high lift cams
Injectors 80s are being used right not but i also have the 72lb ones.



This motor in it now has never seen the track. When I did the rods and pistons and all this I purchased a new block also so that the motor could be put together with out the car ever haveing to really be down at the shop for that long. So the actual motor in there now only has a 1000 to 2000 miles on it.
 
Last edited:

89YSICoupe

New Member
Established Member
Joined
May 19, 2008
Messages
193
Location
NC
Folks, this car is NOT for the inexperienced driver,the power the car makes would put in the 9's right NOW.Good luck with the sale Tim,we will miss having her around.
 

strongs_2009

Member
Established Member
Joined
Jun 5, 2010
Messages
197
Location
Daytona Beach FL
heads and lower intake ported and polished then retuned it. The 852/931 was with a 75 shot before the head work that is why the tq is way up there. it was 813/828 with out the 75 shot. So no the tq really didnt fall that bad but when the tune goes in this week for teh 75 shot after the heads the tq numbers will shoot back up again.
 

saleencobra

Active Member
Established Member
Joined
Oct 29, 2007
Messages
1,132
Location
Michigan
saw this car at mustang week DO WANT!!! car's beautiful a must see in person. if i had the cash i'd be all over it.

unless your interested in a 08 srt8 jeep straight! :)
 

Users who are viewing this thread



Top