2014 GT Auto in the 9's

Tgpatrsn

Member
Established Member
Joined
Jan 2, 2014
Messages
94
Location
SF Bay Area
I reached my goal of a 9 sec timeslip today! The car just amazes me! I wanted to give a special thanks to Blazer707, Jon Lund Jr and Beefcake. All three of those guys are awesome and can't say enough about them! The car is a 2014 Mustang Gt Auto, stock motor(MMR OPG's), Vortech Ti, 3.8 pulley 6 rib, stock suspension, stock headers, stock rear 3.15's, Pypes H-pipe, Circle D 2C, a built 6R80(exedy clutches and inter shaft), Dynotech Driveshaft, Racestar bigs n littles, 275/60-15 Drag Radials(not the pros), ATI Balancer 20% OD, JMS BAP, full interior, a MM 6 point roll bar, ERC race gas, and a Lund Racing tune. Lund has these centri tunes down. Car drives like stock. I made 2 passes today and Sac wouldn't let me make a third one. The DA was 1700. Both passes were footbrake.

5A04061E-1515-400E-BA33-44038F17CF14_zpsdpzx6791.jpg


B522FED2-9F50-406B-8B62-BDEDC0F3F8A3_zps7rzbzekz.jpg
 

weemon2k2

Member
Established Member
Joined
Nov 25, 2012
Messages
64
Location
Wisconsin
Congrats! Must feel good to hit single digits. Any belt slip with the 6 rib and ATI balancer? How much boost are you running?
 

92fiveohfox

Active Member
Established Member
Joined
Dec 4, 2009
Messages
1,097
Location
TX
Awesome time. How much boost is that? First I've ever heard of a vortech ti. Are you on e85 or race gas? Any dynos?
 

Blazer707@TBR

Master Ford Tech
Authorized Vendor
Joined
Aug 19, 2012
Messages
4,313
Location
Bay Area
Congrats again Tom and glad to be apart of it all, was awesome seeing it hit that goal in person yesterday!




Congrats! Must feel good to hit single digits. Any belt slip with the 6 rib and ATI balancer? How much boost are you running?

No belt slip at all.

Awesome time. How much boost is that? First I've ever heard of a vortech ti. Are you on e85 or race gas? Any dynos?

The vortech TI blower is a badass little blower, The car has some ERC race gas splashed into the tank.

Tom runs a MAP sensor so he can monitor boost in his logs, the entire runs are around 12-13 psi at the top of the RPM band before the car shifts and it touches 14 psi at the top of 3rd for a fraction of a second.
 

92fiveohfox

Active Member
Established Member
Joined
Dec 4, 2009
Messages
1,097
Location
TX
Whew lot of boost for a stock motor, glad it's holding up. Is the ti between the v3 and Paxton or how does it compare?
 

dennisn

Member
Established Member
Joined
Oct 4, 2013
Messages
590
Location
chicagoland
Congrats, why wouldn't they let you make another pass?? What other safety equip did you need?
 
Last edited:

dennisn

Member
Established Member
Joined
Oct 4, 2013
Messages
590
Location
chicagoland
Man, I'm so jealous. I keep getting closer every time out. 10.1. Then 10.08. Today. 10.03 Just can't seem to get past that barrier.
 

Users who are viewing this thread



Top