98 Cobra Terminator Build
- Thread starter 2fastfords
- Start date
A few more small updates
Got the brake lines hooked back up, had to add a different fitting to the top line so it matched up with the 03 prop. valve
Waiting on the ABS delete block
Pump mounted up
Also got the air box assembly back in, hoping to maybe mount the dash next weekend.
Got the brake lines hooked back up, had to add a different fitting to the top line so it matched up with the 03 prop. valve
Waiting on the ABS delete block
Pump mounted up
Also got the air box assembly back in, hoping to maybe mount the dash next weekend.
nice work. :rockon:
Sweet. It's going to be bad ass. :beer:
Finally a decent update after awhile!
Fusebox harness was redone, modified some wiring and complete re-wrapped (what a pain). Also started to get the power steering cooler and lines in place.
Reman 03/04 Cobra rack ready to go
Time for some suspension
First time its been off the jackstand and rolling in all but a year!
Rolled it outside on a nice frosty morning for a long over do and well needed bath
All clean!
A mostly ready engine bay, still need a few things, clutch cable, abs delete etc...
The engine is nearly finished, just waiting on the ford dealer to get in some new gaskets and some hardware. Lower intake and valve cover bolts were just done in black.
A quick coat of Ford Semi Gloss Black to keep the theme going
back on
Lastly ill leave you with a shot of the engine with the M122 blower resting on top for a "finished" engine look
Ordering some things this week and hoping to have the engine bay completely finished in another week or two. Need to install some proper hardware, hook up the lines to the rack, bump steer kit install, things like that.
Once thats done, its off for a 6 point cage, and some other small additions. Hope you enjoy the update!
Fusebox harness was redone, modified some wiring and complete re-wrapped (what a pain). Also started to get the power steering cooler and lines in place.
Reman 03/04 Cobra rack ready to go
Time for some suspension
First time its been off the jackstand and rolling in all but a year!
Rolled it outside on a nice frosty morning for a long over do and well needed bath
All clean!
A mostly ready engine bay, still need a few things, clutch cable, abs delete etc...
The engine is nearly finished, just waiting on the ford dealer to get in some new gaskets and some hardware. Lower intake and valve cover bolts were just done in black.
A quick coat of Ford Semi Gloss Black to keep the theme going
back on
Lastly ill leave you with a shot of the engine with the M122 blower resting on top for a "finished" engine look
Ordering some things this week and hoping to have the engine bay completely finished in another week or two. Need to install some proper hardware, hook up the lines to the rack, bump steer kit install, things like that.
Once thats done, its off for a 6 point cage, and some other small additions. Hope you enjoy the update!
Last edited:
Looking great!
Very cool project! Looking forward to seeing more progress!
Finally starting to get somewhere, spare time and work have been killing me but still moving in the right direction.
For whatever crazy reason the trans tunnel mount was severely beaten by a previous owner so I decided to replace that with another one I pulled from a parts car.
Removed and took hammering on the tunnel to get it back in shape
And welded back in and paint, paint color matches the exterior perfectly but not so much on the inside, oh well.
Boost gauge layover mod to show more boost PSI, looks like it came from factory
Got most of the dash back in and tested, so far so good
Ended up swapping to a complete Maximum Motorsports front suspension so here that is installed.
ABS delete block from PRB Machining, amazing quality and fitment
Also did the head cooling mod from James and Cobra Engineering, another awesome piece and great guy to deal with
Ready for install
Finally in the car
Thats about it, hopefully ill get most of the interior back in in the coming weekends and also working on the fuel system now.
For whatever crazy reason the trans tunnel mount was severely beaten by a previous owner so I decided to replace that with another one I pulled from a parts car.
Removed and took hammering on the tunnel to get it back in shape
And welded back in and paint, paint color matches the exterior perfectly but not so much on the inside, oh well.
Boost gauge layover mod to show more boost PSI, looks like it came from factory
Got most of the dash back in and tested, so far so good
Ended up swapping to a complete Maximum Motorsports front suspension so here that is installed.
ABS delete block from PRB Machining, amazing quality and fitment
Also did the head cooling mod from James and Cobra Engineering, another awesome piece and great guy to deal with
Ready for install
Finally in the car
Thats about it, hopefully ill get most of the interior back in in the coming weekends and also working on the fuel system now.
Awesome! Keep it going! Although i know how scarce spare time can be...
I love this project!
God speed!
SV
God speed!
SV
This is obscene! Im very jealous of this car! Want, want, want!!! Outstanding job man!
sweet mother of god this is meticulous. Subscribing
Got the majority of the interior back in, I need to paint the 03 radio and cluster bezel to match my interior.
Got my trans brackets powdercoated and the stiffers T-56 trans mount, great piece.
Condenser and rad in,
Front bumper mounted, heat exchanger in
Put the blower on and the coolant tanks to see how it would all look
Finally starting to come along and get somewhere
Got my trans brackets powdercoated and the stiffers T-56 trans mount, great piece.
Condenser and rad in,
Front bumper mounted, heat exchanger in
Put the blower on and the coolant tanks to see how it would all look
Finally starting to come along and get somewhere
I cant get over how clean this car is!
Great work, pretty neat to see the dash test pic and all the lights and such working and installed. The engine bay looks great also. Very jealous.
That does look great. I'm jealous also!
Awesome build man! Nice to see clean swaps. You're turning a corner! Almost there
Awesome build. I'm subscribing to see this finished.
Users who are viewing this thread
