BAP questions

[AMD[H]unter]

Will a BAP off of a 07 GT fit my car? I looked on KB's site, and it seems that it will, but I am not sure. Please help, guys! Here's a pic:

 

[Lethal SVT97]

it should. thats the same BAP that i have on my cobra

 

[CobraBob]

Yes. KB support told me a BAP from the 2007 Mustang GT will work on a 2003-2004 Cobra. The only difference is that a BAP ordered for a Terminator is adjustible, whereas if ordered for the 2007 Mustang GT they jumper a wire. I don't know very much about the BAP so I'm just passing along info I got from them.

 

[AMD[H]unter]

Well, it seems his tuner told him that it was a 20amp? I didn't know they made a 20amp....?

 

[03cobramanIII]

that looks like mine too it had 20 amp fuse to but i think its a 30 amp? for an 03 cobra

 

[BlckBox04]

it should. thats the same BAP that i have on my cobra

+1 thats the one i have too

 

[AMD[H]unter]

Well, his tuner told him it was a 20amp...should I get it and try it at least? It's only 100 bucks....
Ok, he just told me that it has a 15 and a 17 engraved on the bottom of it....sound right, guys? He also said that the dial goes to 50...does this help determine if it's a 30 or 40 amp?

 

[AMD[H]unter]

.

 

[AMD[H]unter]

?

 

[AMD[H]unter]

Seriously, no one can help me? Thanks to those who've already posted!

 

[HomeboyNorm]

Why not GT pumps? New won't cost that much more than the used BAP that you are uncertain about.

 

[CobraBob]

If you want to be sure, just call Kenne Bell like I did yesterday. Very easy to get to their support department. Your answer is only a phone call away. (909) 941-0985

 

[nighthawk756]

Here's a listing I found for the BAP's.....

KB89066 N/A Boost-A-Pump(20 AMP)(Pumps Smaller Than 255 LPH)
KB89067 S/C Boost-A-Pump(20 AMP)(Pumps Smaller Than 255 LPH)
KB89068 N/A Boost-A-Pump(40 AMP)(For 255 LPH Pumps & Larger)
KB89069 S/C Boost-A-Pump(40 AMP)(For 255 LPH Pumps & Larger)

So I'm assuming our pumps are larger than 255lph and that's why everyone uses the 40amp??

 

[AMD[H]unter]

Why not GT40 pumps? New won't cost that much more than the used BAP that you are uncertain about.

Won't I need more that just the pumps, though? Modded FDPM?

If you want to be sure, just call Kenne Bell like I did yesterday. Very easy to get to their support department. Your answer is only a phone call away. (909) 941-0985

I will give them a call tomorrow...thanks, Bob!

Here's a listing I found for the BAP's.....

KB89066 N/A Boost-A-Pump(20 AMP)(Pumps Smaller Than 255 LPH)
KB89067 S/C Boost-A-Pump(20 AMP)(Pumps Smaller Than 255 LPH)
KB89068 N/A Boost-A-Pump(40 AMP)(For 255 LPH Pumps & Larger)
KB89069 S/C Boost-A-Pump(40 AMP)(For 255 LPH Pumps & Larger)

So I'm assuming our pumps are larger than 255lph and that's why everyone uses the 40amp??

Interesting! Thanks for the link, nighthawk. So maybe he doesn't have the right one for me after all?

 

[Biggieman]

AMD yes you will need to have your stock FPDM modded to run the supercar pumps. $100 from zone 5 performance.

 

[AMD[H]unter]

Well, that drives up the cost to run the GT pumps. Here's a couple more pics of the BAP. I am going to get it tomorrow unless you guys can tell that it's not the right one.

 

[CobraBob]

So you never called Kenne Bell's customer support to verify this would work?

 

[AMD[H]unter]

So you never called Kenne Bell's customer support to verify this would work?

I am now. When you posted that number I didn't see it until they were already closed.

 

[nighthawk756]

I am now. When you posted that number I didn't see it until they were already closed.

And?? What did you find out??:??:

 

[AMD[H]unter]

No, it's not the right one.

We are back to lookin', nighthawk.