What happens if you isolate the ignition switch from the circuit? Might be the switch causing draw
thought it was too so I switch it out still drew current.
What happens if you isolate the ignition switch from the circuit? Might be the switch causing draw
no alarm system in the car is there?
So you think it’s the cluster causing the draw?I feel so ****ing stupid the fuse that been drawing current isn’t the ignition fuse but the I/P fuse panel, Instrument cluster, Powertrain Control Module (PCM) fuse and my cluster been going in and out.
So you think it’s the cluster causing the draw?
Try pulling Central Junction Box Fuse-27 (25 A).
Try pulling Central Junction Box Fuse-27 (25 A).
Well pulled the fuses connected to the maxi fuse and it lead me to fuse 39,27 the amp and the generic electronic module which leads me to power windows, both door ajar switches, I/e cluster, horn/ cigar light, main light switch, brake level switch, wiper/washer, ignition key warning switch, safety belt switch.
Well pulled the fuses connected to the maxi fuse and it lead me to fuse 39,27 the amp and the generic electronic module which leads me to power windows, both door ajar switches, I/e cluster, horn/ cigar light, main light switch, brake level switch, wiper/washer, ignition key warning switch, safety belt switch.