I have a 4 piece set of BF idlers sitting in the garage awaiting my BF 2.76 upper pulley to come in the mail in a few weeks. Now I know reading the title you are immediately going to refer me to shangshiftergaskets.com which I did read, and the recommended belt size for a 2.76 with the 4 piece set is 74.5 or 75.
Now I was researching prices and went to the official billetflow website and they want
2.76..............75.1".................K080751...............4080750 (with 100mm Idler) (Stock Belt)
75.1.. stock belt?
I'm not sure on the stock belt size for the 03-04 Cobra's but i'm not very confident that i'd be able to use the stock belt after installing these 5 pullies.. am I wrong? Or is billetflow incorrect. I don't want to screw up the installation with the wrong parts. I had a 2V before this so this is all new to me.
Now I was researching prices and went to the official billetflow website and they want
2.76..............75.1".................K080751...............4080750 (with 100mm Idler) (Stock Belt)
75.1.. stock belt?
I'm not sure on the stock belt size for the 03-04 Cobra's but i'm not very confident that i'd be able to use the stock belt after installing these 5 pullies.. am I wrong? Or is billetflow incorrect. I don't want to screw up the installation with the wrong parts. I had a 2V before this so this is all new to me.