With an hour or so of searching here and PM'in a few guys about my question I have got some much neeeded information but I'm still not sure exactly what belt size I need.
I need the belt size for these combos on a New Style 2.2 Kenne Bell:
- 3.5 / 4#
- 2.9 / 4#
I found a post from the "Terminator Archive" while searching and saw where someone mentioned if you have a 4# lower you should add 5" to the length of the belt, is that true?
With that being said, I found out what size belts I need for a 3.5 upper only and a 2.9, 3.0 upper only which is 75.1" and 74.5" so should I just add 5" to that?
By the way I have the 3-100mm and 1-92mm BilletFlow idlers.
Thanks guys
Chris
I need the belt size for these combos on a New Style 2.2 Kenne Bell:
- 3.5 / 4#
- 2.9 / 4#
I found a post from the "Terminator Archive" while searching and saw where someone mentioned if you have a 4# lower you should add 5" to the length of the belt, is that true?
With that being said, I found out what size belts I need for a 3.5 upper only and a 2.9, 3.0 upper only which is 75.1" and 74.5" so should I just add 5" to that?
By the way I have the 3-100mm and 1-92mm BilletFlow idlers.
Thanks guys
Chris