Came across this company on FB . Making 03/04 axles

BoostedByV

No Fly By ZONE
Established Member
Joined
Feb 20, 2014
Messages
1,242
Location
Los Angeles
G force engineering
did a quick search and nothing came up on here
 

Attachments

  • image.jpg
    image.jpg
    176.6 KB · Views: 231
Last edited:

cj428mach

Well-Known Member
Established Member
Joined
Sep 21, 2012
Messages
7,480
Location
Kansas
Im pretty sure my friend joe dropped his irs there so they could use it as a pattern to build off of.
 

BMR Tech

Active Member
Joined
Jun 15, 2011
Messages
4,454
Location
FL
GForce FTW!

I know these guys very well, and use their stuff on BMR cars and my personal car/s.

I have been 1.2 sixty foot on their S550 Half shafts. ;)
 

Cabbage

Active Member
Established Member
Joined
Sep 1, 2013
Messages
464
Location
Camrose Alberta
That's awesome!! I believe I emailed them about this a few months back, asked if they made them for 03-04 and no one got back to me. Haha
 

bubblehead93

Active Member
Established Member
Joined
Nov 19, 2009
Messages
884
Location
Charleston, SC
I had asked them awhile back when they started making half-shafts for the new irs mustangs and they came back and said they had no plans at this time... I'm glad plans change...

r/
Andy
 

TVSCobra

Active Member
Established Member
Joined
Sep 25, 2007
Messages
2,551
Location
Georgia
It would be nice to be able to disconnect the axles from the differential flanges without removing the control arms to remove the axles from the differential. I work for BMW and I hate that they when to a one piece design, so now you have to remove the control arms to get the axles completely out to remove the differential. It was nice to be able to unbolt the axles from the inner flange and then be able to drop the differential, it would cut the time to remove the differential in half with this design.
 

Users who are viewing this thread



Top