My car was running fine then I had it detailed and didn't realize they were going to get the motor wet.
It will idle and run at low speeds fine but when you get into the throttle it starts to basically bog down
I took the plug covers off and there was water in the drivers side, I blew all the water out and let it dry
I also cleaned the MAF and it is still doing the same thing
Any other ideas to check?
It will idle and run at low speeds fine but when you get into the throttle it starts to basically bog down
I took the plug covers off and there was water in the drivers side, I blew all the water out and let it dry
I also cleaned the MAF and it is still doing the same thing
Any other ideas to check?