Eaton Swapped 99 Cobra

Ike Turner

New Member
Established Member
Joined
Nov 6, 2013
Messages
146
Location
Down South
Engine & chassis has 62,000 original miles on it. The eaton swap was done using parts off of a 30k mile 04 cobra that went turbo.


Mods
Stock 99 motor with eaton swap
Tubular K-member, control arms, & coilovers (front)
UPR rear control arms (SRA)
Metco lower pulley kit (stock ring)
Canton aluminum radiator & intercooler expansion tanks
Billetflow Idler set with new bearings.
Billetflow 3.4 blower pulley
Modular Motorsports Coolant Crossover delete
JLT carbon fiber Ram Air Intake
Evenflo gen 2 head cooling mod
Moroso oil catch can (not installed but included) I bought it incase the breathers smelled bad or leaked. But neither has happened
AFCO heat exchanger
03-04 cobra fuel tank & pumps
Kenne Bell Boost-a-pump with wiring upgrade
03-04 Cobra MAF
TKO 5 speed transmission
Aluminum driveshaft
Solid rear axle with 4.10's
Long Tube headers
O/R X pipe
Flowmaster Mufflers
Ford Racing Shift Knob
MGW shifter with shortest throw
Autometer Lunar Oil Pressure & Boost gauges mounted with autometer cluster trim (Illumination on boost gauge doesn't work but gauge itself works fine)
Smoked Head lights (OEM headlights included also)
Aftermarket CD/mp3 player
XXR 526 staggered wheels 17x9 front-17x10 rear
Brand New MT ET Street II 315/35/17's on rear
Gates HD green belt
Full lenth subframe connectors (welded in)
2001 COBRA rear bumper
SCT x3 tuner

Expansion tanks, heat exchanger, valve covers, eaton inlet, & Supercharger have been painted black or wrinkle black.
Driver's seat has a tear in the leather and there is a small quarter sized dent in the passenger rear quarter panel. Otherwise car is in great shape

444hp-441ft/lbs torque, tuned by XXX motorsports in Pensacola, FL.

Asking $14k obo

Car is located in Mobile, AL
251-288-7082 Ike

Reason for sale is the wife is bitching about building another house so the toy has to go :nonono:

20140326_113945_zpsaoo2vpjw.jpg

20140326_113938_zpsavsyg7rn.jpg

20140326_113924_zpsqgmaet8f.jpg

20140326_113916_zpsnenzxugt.jpg

20140326_113859_zpss4vgh3jn.jpg

87f4a1c6-ac53-4392-abac-11a8f84480c8_zps74fb5b09.jpg

20140326_114115_zpsq2flbhaa.jpg

20140326_114140_zpsgypi60ne.jpg

20140326_114021_zpslrgkt3oj.jpg
 
Last edited:

Ike Turner

New Member
Established Member
Joined
Nov 6, 2013
Messages
146
Location
Down South
Just added new Gates Green blower belt & changed the billetflow idler pulley bearings.
Dyno appointment is in the morning
 

Ike Turner

New Member
Established Member
Joined
Nov 6, 2013
Messages
146
Location
Down South
Car made 444 hp-441 ft/lbs tq. Conservative timing & nice safe 11.5 AFR.
It makes a minimum of 400 ft/lbs between 2400-5800 rpm.

Ready for new owner to enjoy the blower :beer:
 

Users who are viewing this thread



Top