Search isn't working as well as i would like on this subject so i will just ask. My setup will be 15x10 rears and 17x4 1/2's on the front. I have always ran M/T ET streets but now considering QTP's or similar. I am simply looking for experience and or opinions with said tires or another and where to order from. Also what size should i be considering with 3.31's? Thanks for the info in advance guys. :beer:
Help pick my tire (Drag setup) and size..
- Thread starter KYSVT
- Start date
26x10.5 et street bias plys. 1.55 60's on 100% stock suspension and on a shitty prepped street car night
I run the 28x10.5R15 M&H Drag Slicks and the M&H radial front runners 17's in the front.
Everyone says the M&H slicks are too soft and I have not had any problems with them at all, barely any sway on the big end with 12-13psi in them and cutting a 1.60FT and im a horrible driver.
-Thomas
Everyone says the M&H slicks are too soft and I have not had any problems with them at all, barely any sway on the big end with 12-13psi in them and cutting a 1.60FT and im a horrible driver.
-Thomas
Awesome info, what psi? How hard are you launching? :beer:
Awesome man thanks for the input :beer: How hard are you launching?
Damn and they are hooking that good. Big burnout?
Yes, they have been hooking really good. Good sized burnout but nothing abnormal.
-Thomas
Awesome man, thanks for the input and info. I will def be checking these out :beer:
Usually 6k rpm's. Higher if the track is good. Tires set to 14.5 psi
I run the MT ET street radial on my WS6 and its been a 1.23 60'. It only comes in a 275/60/15 and that's a tall tire for 3.31 geared NA setup. http://www.mickeythompsontires.com/strip.php?item=ETStreetRadialPro
I ran the Hoosiers for 2 years with good luck also, didnt get as many passes though.
I just cut a 1.46 60' on 305/35/19 MT drag radials in my 2012 5.0.
I know those work good also.
I ran the Hoosiers for 2 years with good luck also, didnt get as many passes though.
I just cut a 1.46 60' on 305/35/19 MT drag radials in my 2012 5.0.
I know those work good also.
1.46 on a 19? I believe you but how? What pressure?
Users who are viewing this thread
