How Much Power?

J's98Snake

New Member
Established Member
Joined
Jul 16, 2003
Messages
478
Location
N. FL.
Haven't done one of these in a while, new engine about to install.

Specs:
284 CI
9.01 comp
P&P B-heads
MMR custom cams
18 psi (vortech)
IMRCs deleted
1/2 in plenium spacer
accufab TB
60 #
full exhaust, long tubes ect..
Mr. Snow Meth injection 50/50 mix
 

98 Saleen Cobra

Well-Known Member
Established Member
Joined
Feb 28, 2007
Messages
19,524
does it have a intercooler/aftercooler?? assuming you have all the fuel needed I'm going to say in or around 600rwhp..
 

jimmeehboi

VNMIZED
Established Member
Joined
Aug 19, 2009
Messages
739
Location
Ohio
18psi on the s trim?? isn't that about over spinning that blower... and your running 93 octane correct? Like 98 saleen said...as long as your fuel set up is up to the power standards your looking for should be around 600...give or take a little bit.
 

J's98Snake

New Member
Established Member
Joined
Jul 16, 2003
Messages
478
Location
N. FL.
It's got plenty of fuel, this isn't my first blower set-up.

The previous motor minus cams, IMRC deteles and the plenium made 550-570 depending on the dyno and weather conditions. Anyway I'm hopin for 630 + with the cams and free flowing topside.

I'm just having some fun and excited to get my motor back so I can put it in.
 

crazycarlo

Well-Known Member
Established Member
Joined
Jul 31, 2005
Messages
6,116
Location
Savannah, GA
Id get rid of the spacer, they really havnt done anything for B-head cars. Goodluck with the setup man and deff keep us updated. Is it already in the car? Pictures?
 

J's98Snake

New Member
Established Member
Joined
Jul 16, 2003
Messages
478
Location
N. FL.
Not in the car yet, comp cams was out of cam cores for a while. I talked to them yesterday and they had a shipment coming in but there's a backlog so I hope they arrive soon.
 

phillipmach1

Member
Established Member
Joined
Jun 19, 2006
Messages
179
Location
Wavelad ms
If you want more boost 928 motorsports makes an aftermarket impeller that will change an s-trim to a v-trim for 500.00 dollars and you don't have to do any modification to the head unit.Good luck
 

Users who are viewing this thread



Top