After tackling the IRS bushings last weekend and still needing to tackle the front I've been serious considering just picking up a press. I don't need one to often but I do find times where one would be useful periodically.
Since it's not an every day use type of thing I was thinking about something like this one:
http://www.jegs.com/i/JEGS/555/8151...0&cadevice=c&gclid=CIqKxtiXs9ACFQQoaQodh8IFfw
Anyone have experience with this one or another one you would recommend? Ideally trying to stay below $200 but could up that a little if it makes for a big difference. Also, any benefit in going with a 20 Ton over a 12? Seems like 12 would be enough for bushings, bearings and ball joints.
Since it's not an every day use type of thing I was thinking about something like this one:
http://www.jegs.com/i/JEGS/555/8151...0&cadevice=c&gclid=CIqKxtiXs9ACFQQoaQodh8IFfw
Anyone have experience with this one or another one you would recommend? Ideally trying to stay below $200 but could up that a little if it makes for a big difference. Also, any benefit in going with a 20 Ton over a 12? Seems like 12 would be enough for bushings, bearings and ball joints.