maf ?

[tire_fryin89]

Ok, as of right now I dont need it, but soon Ill be porting my blower and adding a 2# lower pulley to go with my 2.8 upper so Im probably going to run out of maf adjustability and need a new MAF. The previous owner already put a C&L 95mm maf system on my car, but I believe that you take the actual sensor out of your stock maf and install it in the 95mm correct? And if this is the case than is there anything I can buy to just replace the sensor itself for more adjustability? Or maybe a diablosport? I hate to replace the whole maf when Ive got a 95mm housing but if I have to then I guess I will. Thanks

 

[KILRSVT]

good question...i wonder if a the MAFia is compatible with an aftermarket mass air.....if you have to buy a whole new mass air..you can always sell it. or keep the one you have beign that the aftermarket mass air aren't as reliable.

 

[cobracide]

The C&L uses the existing Ford electronics so you should be able to swap in the BA2400 electronics. A mafia would also work as well. You can always call C&L for conrfirmation.

http://www.cnlperformance.com/video/03Cobra_Install.avi