Sounds about right. Welcome to the hills by the way.
thanks
Sounds about right. Welcome to the hills by the way.
Here is the major nut swinger himself LOL
Wait , I still dont get it.... a 5.0 and pullied cobra run out of steam after 60 mph . I dont know about THAT
Yep I said it. A Mach 1 with your mods will get walked by any stock 392 that knows how to press the gas peddle. Most guys are getting 12.7-12.8 before 5K miles and the guys running the faster times are the ones that are broken in
For refrence
392 Fastest List
Notice the best time for a stock 392 is 12.253@113
01: brian@snl [email protected] 1.736 60' 392 A5 CAI. Catback, drag radials
02: SRT8Tech [email protected] 1.907 60' 392 A5 stock
03: Dad's Toy [email protected] 1.845 60' 392 A5 strut tower braces, sub frame connectors
04: indybill [email protected] 1.825 60' 392 A5 K&N, Cat Back
05: 04bluesrt4 [email protected] 1.967 60' 392 A5 K&N, Cat Back
06: Flying Dutchman [email protected] 2.033 60' A5 stock
07: KyHemiRT [email protected] 1.949 60' 392 A5 stock
08: bskylerj [email protected] 1.904 60' 392 A5 stock
09: DonP [email protected] 1.912 60' 392 A5 stock
10: Red Barron [email protected] 2.021 60' M6 Stock
11: hemi420 [email protected] 1.933 60' 392 M6 stock
12: Viper [email protected] 2.033 60' 392 M6 K&N
13: CrankCase [email protected] 2.007 60' M6 stock
14: SparkChicken [email protected] 2.080 60' 392 A5 stock
15: nevertoofast [email protected] 2.1492 60' 392 A5 K&N
16: MrBohica [email protected] 2.1011 60' 392 stock
17: GodsRodsHEMI [email protected] 2.059 60' 392 A5 stock
18: 555ss [email protected] 2.004 60' 392 M6 stock
19: Mayra [email protected] 2.161 60' 392 A5 stock
20: Litos [email protected] 2.119 60' 392 A5 stock
Don't be dumb
Wicked Motorsports "Stock" 2004 Mach 1 12.20's - YouTube
Also mine had similar mods as the one above and went 12.6 with a crappy 60ft at 112
Be Dumb about what? How many Mach 1's go 12.20's with bolt ons? You need to re watch that video
4.30 Gears
Passenger Seat Removed
Lighter Battery
Bigs and Littles
K&N Filter
Thats LS1tech stock my friend
He has less power mods then stopsign and still went low 12s... To answer your question alot of machs have been low 12s with boltons.
Actually I am running the Mach with bolt ons and gears for the first time this coming friday. The Mopar nut swingers were saying the 392 is a 12.3-12.4 car stock.
I will be at Atlanta Dragway, my Mach has all of 5 bolt ons done to it if you include the short throw shifter. I offered for the Mopar boys to find any stock 392 to run me, didn't hear anything back. Here's the thread What's so challenging about a Challenger? Cross off yet another Dodge - LS1TECH
Yep I said it. A Mach 1 with your mods will get walked by any stock 392 that knows how to press the gas peddle. Most guys are getting 12.7-12.8 before 5K miles and the guys running the faster times are the ones that are broken in[/QUOTE
:lol:..really? around her they can't get out of the 13s to say thier life's..13.3 is the best time I have seen in a stock 392..But I guess thats the thing about the internet you can type anything..
In thier dreams or on the internet, you pick!
Yea thats not going to happen..all show no go!!
Yep I said it. A Mach 1 with your mods will get walked by any stock 392 that knows how to press the gas peddle. Most guys are getting 12.7-12.8 before 5K miles and the guys running the faster times are the ones that are broken in[/QUOTE
:lol:..really? around her they can't get out of the 13s to say thier life's..13.3 is the best time I have seen in a stock 392..But I guess thats the thing about the internet you can type anything..
Like I said find me a bolt on mach 1 in my area to run me. If it cant beat me it damn sure wont beat a 392. I have Intake, Exhaust, Tune and Im a 6.1, Bolt on Machs run 8.6-8.9 here where Im running 8.2-8.3. Keep in mind the CA tracks are slow and DA is bad.
Me vs a bone stock Vert GT500 this is one of or 2 runs
[nomedia="http://www.youtube.com/watch?v=LsqacI4KhJY"]Charger SRT8 vs GT500 (Irwindale Dragstrip) - YouTube[/nomedia]
I have yet to see one do that at any track I have ever been to. Most of my friends that have mach's run 12.50-12.70's with bolt ons. Here in cali forget it the best Ive seen is 12.90's
onebadw , this is CA...Mach1's with bolt-ons wont clip those times out here for the simple fact that CA tracks suck and have poor DA's.
...doesnt mean they cant hit them, its just that me and you will never witness it because of the reason stated above.
i almost wanna call :bs: on some of the 5.0 times that i see posted here for the simple fact that when i go to the track (CA speedway) , bolt-ons 5.0's can only muster up mid 13's @just over 110. imagine what a bolt-on mach1 would run! but then i remember that we're here in Cali and that it has nothing to do with the driver, just the part of the country we're in.
so to recap, i agree that bolt-on machs cant achieve those times, but its because we're in SoCal...in other parts of the country, 12's are an easy goal for said car.
:beer: