My eaton swap

[luke1333]

Went 12s today with a crappy 60

What were you racing???

 

[Maustang]

Some 4 door Mazda, it was a test and tune day, the weather was pretty crappy today so not a lot of people showed up. The ran everyone 11.00 and slower together. Poor guy had his girlfriend in the car with him video taping the run.

 

[2003DSGMACH1]

Could you tell what radiator hoses do I need to get to do the eaton swap? The hoses and belts is all I need to start my swap.

 

[watman02]

Check the eaton swap thread on mach1 registry has an entire parts list for you.
http://www.mach1registry.org/forums/showthread.php?t=71833

 

[2003DSGMACH1]

That's list is what I when by to get all of my parts so far but I just want to go to autozone and pick up the hoses instead of ordering the so I can start on the swap ASAP. The list give me parts numbers for the hoses but don't tell me which one it is and I know if I go in there they won't know by the parts numbers and just show me there computer and ask me which one it is.

 

[Maustang]

If I remember right The two that come off the coolant crossover and the one from the oil cooler over to the t-stat housing.
Hear is a thread with a couple of pics for comparison or you could buy the ones he is selling.
http://www.svtperformance.com/forum...ng-Hose-System-Similar-Mach-1-and-03-04-Cobra

 

[MachToLoud1]

I can't seem to find a good price on a cobra tank and fuel pumps, one of my friends upgraded his pump so he is gonna sell me his stock cobra pumps with the fuel hat. My question is what else would I need to make it work with my stock tank if possible?

thanks

 

[Maustang]

I can't seem to find a good price on a cobra tank and fuel pumps, one of my friends upgraded his pump so he is gonna sell me his stock cobra pumps with the fuel hat. My question is what else would I need to make it work with my stock tank if possible?

thanks

You just have to break apart the basket in the tank, just no wot when your under a 1/4 of fuel.
Also our fuel level sending unit bolts on different than the cobra's. I used a couple of self taping sheet metal screws to attach mine.

 

[Maustang]

Went out to the track yesterday
Bogged the launch on this one
Next mod is going to be the rear, I'm tired of soft launching the car
[video=youtube_share;9m83DN8Kwx4]http://youtu.be/9m83DN8Kwx4[/video]

 

[watman02]

So what did u run?

 

[Maustang]

So what did u run?

That was a 13.07 @ 111 with a 2.0 60'

 

[MachToLoud1]

You just have to break apart the basket in the tank, just no wot when your under a 1/4 of fuel.
Also our fuel level sending unit bolts on different than the cobra's. I used a couple of self taping sheet metal screws to attach mine.

Should I add a BAP?
If so should i go with the 20amp or 40amp?

Thanks.

 

[Maustang]

Should I add a BAP?
If so should i go with the 20amp or 40amp?

Thanks.

I'm not, if your staying with the stock pulley you should be fine.
But I do believe you would want to run the 40amp with the dual cobra pumps
And the 20 with Single pump set ups like the stock Mach or gt

 

[Maustang]

A couple of pics from the local mustang show today

 

[SHAUN351]

Very Nice
Big and smalls just never age

 

[Maustang]

Little update for the old mustang.

Went to the annual local mustang show.
And actually won in my class.
I've been going to the show for the last 5 years or so this is the first time I've ever won anything. It got me pretty excited.

And just finished putting this together.
It's the 31 spline trac-lok with moser axles and steeda upper adjustable control arms.

 

[bleedingfordblu]

nice man, congrats

 

[pipejob1]

Nice car what size rear MT you running

 

[Maustang]

Nice car what size rear MT you running

325/50/15

Got her put back together and put some miles on. Everything performed as it should.

 

[Planter]

beautiful! very nice work!