Hey guys. I finally got tired of my 4 link setup and bought a used 99 IRS dirt cheap.
Still need:
BF rear IRS brackets (will hold off buying)
Parts obtained:
Full tilt boogie bushing kit
brake line tee fitting
MM low profile IRS bolts
MM sway bar bushings
TFBR adjustable sway bar end links
FRPP 4.10s, bearings and clutch pac
cobra rotors
cobra pads
Flowmaster IRS catback (thanks Tim!)
newly used abs sensors (see pic below, haha)
BF diff brace
03/04 cobra hard launch (pinion) brace
maximum motorsports bump steer kit
cobra OEM bilstein shocks (issue)
rear eibach lowering springs
rolled fenders
misc brake line
gears installed along with bearings and clutches
I'm pretty excited for the swap, may need a spacer for the rear tires to fit the 315 wide sumis...
pics:
FTBR bushings
newly used abs senors
asb sensors that came with the IRS, lol:
The IRS!
I've been collecting parts and hopefully soon ill be installing everything.
Still need to get the gears, bearings and clutches installed into the IRS pumpkin. Any ideas on a good place near connecticut?
Still need:
BF rear IRS brackets (will hold off buying)
Parts obtained:
Full tilt boogie bushing kit
brake line tee fitting
MM low profile IRS bolts
MM sway bar bushings
TFBR adjustable sway bar end links
FRPP 4.10s, bearings and clutch pac
cobra rotors
cobra pads
Flowmaster IRS catback (thanks Tim!)
newly used abs sensors (see pic below, haha)
BF diff brace
03/04 cobra hard launch (pinion) brace
maximum motorsports bump steer kit
cobra OEM bilstein shocks (issue)
rear eibach lowering springs
rolled fenders
misc brake line
gears installed along with bearings and clutches
I'm pretty excited for the swap, may need a spacer for the rear tires to fit the 315 wide sumis...
pics:
FTBR bushings
newly used abs senors
asb sensors that came with the IRS, lol:
The IRS!
I've been collecting parts and hopefully soon ill be installing everything.
Still need to get the gears, bearings and clutches installed into the IRS pumpkin. Any ideas on a good place near connecticut?
Last edited: