I've got a chirp chirp chirp on cold start up that goes away after a few minutes. I'm guessing it's an idler or tensioner pulley, so I'm planning to change all of them for good measure. Per the VMP picture below, there appears to be two idlers on the drive belt, and one on the tensioner; and only one on the blower belt tensioner. The issue I'm running into is whether all of these are the exact same size and design. It's just too hard to see down in there without taking out the fan/coolant reservoirs, so I"m hoping someone knows the answer to this.
Online purchasing options show 75mm or 102mm, and grooved or smooth. For the life of me I can't find any info about whether there are any differences between the various pullies pictured below. Can anyone help? Even better, where are you buying them? Thanks in advance.
(Edited - had the wrong picture)
Online purchasing options show 75mm or 102mm, and grooved or smooth. For the life of me I can't find any info about whether there are any differences between the various pullies pictured below. Can anyone help? Even better, where are you buying them? Thanks in advance.
(Edited - had the wrong picture)
Last edited: