Had to install a new clutch on my blown 5.0 as the stock was slipping quite a bit. Picked up the exedy stage 3 and spec billet steel flywheel. Had helluva time getting the transmission to mount up as the alignment tool with the exedy clutch did not fit the pilot bearing anywhere near snuggly. Anyways after all said and done I pumped the clutch pedal until it had pressure all the way to the top. The clutch is engaging like an inch from the floor and causing a bit of stiffness to get into first gear at times. From what I read there is no pedal adjustment and was curious is this normal. Should it get better with time? Also mine never threw a code requiring a ckp sensor relearn. Does it take time/miles before it throws codes?
Last edited: