New PB Oh so close...

WildOne12 · Nov 12, 2013

<!--[if gte mso 9]><xml> <w:WordDocument> <w:View>Normal</w:View> <w:Zoom>0</w:Zoom> <w:TrackMoves/> <w:TrackFormatting/> <w

unctuationKerning/> <w:ValidateAgainstSchemas/> <w:SaveIfXMLInvalid>false</w:SaveIfXMLInvalid> <w:IgnoreMixedContent>false</w:IgnoreMixedContent> <w:AlwaysShowPlaceholderText>false</w:AlwaysShowPlaceholderText> <w

oNotPromoteQF/> <w:LidThemeOther>EN-US</w:LidThemeOther> <w:LidThemeAsian>X-NONE</w:LidThemeAsian> <w:LidThemeComplexScript>X-NONE</w:LidThemeComplexScript> <w:Compatibility> <w:BreakWrappedTables/> <w:SnapToGridInCell/> <w:WrapTextWithPunct/> <w:UseAsianBreakRules/> <w

ontGrowAutofit/> <w:SplitPgBreakAndParaMark/> <w

ontVertAlignCellWithSp/> <w

ontBreakConstrainedForcedTables/> <w

ontVertAlignInTxbx/> <w:Word11KerningPairs/> <w:CachedColBalance/> </w:Compatibility> <w:BrowserLevel>MicrosoftInternetExplorer4</w:BrowserLevel> <m:mathPr> <m:mathFont m:val="Cambria Math"/> <m:brkBin m:val="before"/> <m:brkBinSub m:val="--"/> <m:smallFrac m:val="off"/> <m:dispDef/> <m:lMargin m:val="0"/> <m:rMargin m:val="0"/> <m:defJc m:val="centerGroup"/> <m:wrapIndent m:val="1440"/> <m:intLim m:val="subSup"/> <m:naryLim m:val="undOvr"/> </m:mathPr></w:WordDocument> </xml><![endif]--> Managed a new personal best last week & getting more consistent E.T's. Still need to work on getting the 60 ft time down... a.k.a. Driver Mod!

I managed to get 4/5 clean passes starting with a 12.01, 12.12, 12.3, 12.6 (2<sup>nd</sup> gear lock out) & finally 12.03 with my best 60 ft. yet at 1.71

v8stang · Nov 12, 2013

im assuming on drag radials?

WildOne12 · Nov 12, 2013

28 X 10.5 MT Stiff Sidewall Slicks.

v8stang · Nov 12, 2013

oh wow. You definitely need a driver mod lol jk

A 2 step really helps. I've cut low 1.60s on stock suspension with 26" et drags and 3.31s
With that mph of yours, you should easily be in the mid 11s or faster

Consider a 2 step. Or better yet, hook up your sct tuner and adjust the neutral rev limiter to work as one.

What rpm are you currently launching at?

WildOne12 · Nov 12, 2013

<!--[if gte mso 9]><xml> <w:WordDocument> <w:View>Normal</w:View> <w:Zoom>0</w:Zoom> <w:TrackMoves/> <w:TrackFormatting/> <w

unctuationKerning/> <w:ValidateAgainstSchemas/> <w:SaveIfXMLInvalid>false</w:SaveIfXMLInvalid> <w:IgnoreMixedContent>false</w:IgnoreMixedContent> <w:AlwaysShowPlaceholderText>false</w:AlwaysShowPlaceholderText> <w

oNotPromoteQF/> <w:LidThemeOther>EN-US</w:LidThemeOther> <w:LidThemeAsian>X-NONE</w:LidThemeAsian> <w:LidThemeComplexScript>X-NONE</w:LidThemeComplexScript> <w:Compatibility> <w:BreakWrappedTables/> <w:SnapToGridInCell/> <w:WrapTextWithPunct/> <w:UseAsianBreakRules/> <w

ontGrowAutofit/> <w:SplitPgBreakAndParaMark/> <w

ontVertAlignCellWithSp/> <w

ontBreakConstrainedForcedTables/> <w

ontVertAlignInTxbx/> <w:Word11KerningPairs/> <w:CachedColBalance/> </w:Compatibility> <w:BrowserLevel>MicrosoftInternetExplorer4</w:BrowserLevel> <m:mathPr> <m:mathFont m:val="Cambria Math"/> <m:brkBin m:val="before"/> <m:brkBinSub m:val="--"/> <m:smallFrac m:val="off"/> <m:dispDef/> <m:lMargin m:val="0"/> <m:rMargin m:val="0"/> <m:defJc m:val="centerGroup"/> <m:wrapIndent m:val="1440"/> <m:intLim m:val="subSup"/> <m:naryLim m:val="undOvr"/> </m:mathPr></w:WordDocument> </xml><![endif]--> The 12.01 was at around 4500 & the car bogged slightly... The 12.03 was right around 6000 & gave me my best 60 ft. time so far.

Working on the Driver Mod... I have been able to pick up Time & Consistency with each trip back to the track, I'll get there.

Blazer707@TBR · Nov 12, 2013

Pratice will make you run faster. Especially with getting that 60ft down more. Just keep working at it and you will get there.

Elwood617 · Nov 12, 2013

Good job, you have the same problem I do. Got to get that 60ft time down

VETTEHUNTER · Nov 12, 2013

Awesome man!!! When is Cecil closing this year? I haven't had a chance to go all year with work. I'd like to at least get down there once.

WildOne12 · Nov 12, 2013

VETTEHUNTER said:
Awesome man!!! When is Cecil closing this year? I haven't had a chance to go all year with work. I'd like to at least get down there once.

Thanks... Cecil is open on Fri. & Sat until the 16th of this month. After that it's weather permitting on Fri. & Sat. until the 14th of December.

I thought I was done with the track for the year myself... Now I'm thinking of going next Saturday for one more try at the 11's. They have some Philly vs. the World event scheduled with Test & Tune welcome...

VETTEHUNTER · Nov 12, 2013

WildOne12 said:
Thanks... Cecil is open on Fri. & Sat until the 16th of this month. After that it's weather permitting on Fri. & Sat. until the 14th of December.

I thought I was done with the track for the year myself... Now I'm thinking of going next Saturday for one more try at the 11's. They have some Philly vs. the World event scheduled with Test & Tune welcome...

Hmm...Tempting.

WildOne12 · Nov 12, 2013

Speed is addicting... never get enough :burnout:

beefcake · Nov 12, 2013

just a little bit more...

WildOne12 · Nov 12, 2013

beefcake said:
just a little bit more...

And of course all our favorite vendors like to tempt us with some great deals on all the parts we need to go faster...

oke: Go ahead buy them parts you know you want them... :dancenana:

It's a good thing I don't live closer to JPC's shop or I would need a 2nd job!

New PB Oh so close...

WildOne12

New Member

v8stang

Member

WildOne12

New Member

v8stang

Member

WildOne12

New Member

Blazer707@TBR

Master Ford Tech

Elwood617

Active Member

VETTEHUNTER

No cure for this disease.

WildOne12

New Member

VETTEHUNTER

No cure for this disease.

WildOne12

New Member

beefcake

Authorized Vendor

WildOne12

New Member

Users who are viewing this thread