Im looking to purchase the Carroll Shelby CS-14 Wheel 20"X9.5 / 20"x11 for my 2010 GT500.
However i have heard it said that the 2010-2014 mustangs should not go wider than 9.0 in the front or you will get rubbing when making a tight turn. Also the offsets for these are
Offset: +40mm front and +50mm rear. Which leads to me worry that they will be sticking out past the wheel well, ruining the look. Was wondering if anyone has these on their GT500 or if you happen to know these measurements wont be an issue.
Below is a link to the wheels themselves.
https://www.cjponyparts.com/carroll...wheel-20-x11-gloss-black-2005-2019/p/W1036-V/
Much appreciate any info on this.
However i have heard it said that the 2010-2014 mustangs should not go wider than 9.0 in the front or you will get rubbing when making a tight turn. Also the offsets for these are
Offset: +40mm front and +50mm rear. Which leads to me worry that they will be sticking out past the wheel well, ruining the look. Was wondering if anyone has these on their GT500 or if you happen to know these measurements wont be an issue.
Below is a link to the wheels themselves.
https://www.cjponyparts.com/carroll...wheel-20-x11-gloss-black-2005-2019/p/W1036-V/
Much appreciate any info on this.