Next mod?

[yelostang]

I was just wondering if you guys could help me out with my next mod. The ones I have so far are........

Apten ported blower
2.75 pulley
12" open filter
upr/magnaflow x-pipe w/cats
borla stingers
full length subframes
predator w/tune from James @ RWTD (great tune btw)
pro 5.0
100mm aux idler

It dynoed at 488 hp and 480 tq SAE a few months ago when it was really hot here.

 

[LTHL VNM]

how about a good set of drag radials

 

[ModMike1572]

Yep, you'll need some tires with that setup. Nittos is what i recommend.

As far as the next performance mod, i would go with a 75 shot!

 

[BLWN03]

How about my little personal mod for your Pro 5.0 reach problems..i know you have them just like me...

Pm me if you would like details...

Jay

 

[yelostang]

where's the best place to get nittos?

 

[LTHL VNM]

if you buy em from discount tire tell them you are an SVTOA member, you will get a discount

 

[03SonicSnake]

You could always add an aftermarket throttle body and plenum, or get the stocker ported.

 

[CobraBob]

Gords heat exchange because HEAT sucks! Another mod to consider would be porting your stock TB/plenum (Amazon Racing). If it were me I'd do the HE next and then the porting. Heck, it's Christmas. Have your wife or girlfriend give you the HE for Christmas and make the porting deal a Christmas present to yourself. LOL!

 

[SnkebiteL]

drags for sure. Bfg lauching at 3k. No slip

 

[postban]

Gords HE
Billetlflow Throttle Body
Gasket match a Billetflow elbow (plenum)
replace the remaining stock idlers before they grenade on you-->Billetflow
26 spline input shaft (you can bust the 10 spline stocker at your power level)
Centerforce DF clutch(you are gonne smoke your stocker soon)
SLP Linelock
Nitto 315/35 R17
Billetflow Diff brace (lot of busted ones wth less power than you are making)
Level 2 halfshafts
Metco drive shaft loop for safety
and many many more.............

let us know when you get all these done.