Well I finished my engine build up and I went to crank it up and it wouldnt fire. Come to ind I dont have any fuel pressure but pump is priming. I changed out the pump and still no pressure but you can hear the pump kick on there is 12v at the Inertia switch and connector to the fuel pump.
There was one issue when I turned the key on at first after the build. There was an electrical BUZZ coming from the pass wheel well and I traced it to the wheel speed sensor(i think thats what it is) the connection wasnt clipped in correctly.
I checked the DTC codes and nothing popped up
Sorry I should Say Im getting the tinest pressure up at the rails . after a bunch of cycles it gets up near 10 psi
There was one issue when I turned the key on at first after the build. There was an electrical BUZZ coming from the pass wheel well and I traced it to the wheel speed sensor(i think thats what it is) the connection wasnt clipped in correctly.
I checked the DTC codes and nothing popped up
Sorry I should Say Im getting the tinest pressure up at the rails . after a bunch of cycles it gets up near 10 psi
Last edited: