• Welcome to SVTPerformance!

Notch swap

Discussion in 'Fox Body Mustangs' started by twcbitten, May 7, 2019.

  1. twcbitten

    twcbitten Member Established Member

    Messages:
    96
    Joined:
    May 14, 2011
    Location:
    Brainerd, MN
    Bought this 89 notch a few years ago. It was a complete car. I got it home, drove it up the road 1/4 mile whipped a shitty came home and gutted it. It sat for a couple years. In the middle of my cobra build, I had an opportunity to buy someone out of their swap parts. Seller was from Alabama and we met in Kansas. Swapped the parts and here we go....















     
  2. twcbitten

    twcbitten Member Established Member

    Messages:
    96
    Joined:
    May 14, 2011
    Location:
    Brainerd, MN












     
  3. twcbitten

    twcbitten Member Established Member

    Messages:
    96
    Joined:
    May 14, 2011
    Location:
    Brainerd, MN








     
  4. twcbitten

    twcbitten Member Established Member

    Messages:
    96
    Joined:
    May 14, 2011
    Location:
    Brainerd, MN




     
  5. PaxtonShelby

    PaxtonShelby TKSDABOD Established Member

    Messages:
    5,431
    Joined:
    Nov 16, 2010
    Location:
    Pittsburgh, PA
    Giddy up!!
     
  6. twcbitten

    twcbitten Member Established Member

    Messages:
    96
    Joined:
    May 14, 2011
    Location:
    Brainerd, MN








     
  7. twcbitten

    twcbitten Member Established Member

    Messages:
    96
    Joined:
    May 14, 2011
    Location:
    Brainerd, MN




     
  8. twcbitten

    twcbitten Member Established Member

    Messages:
    96
    Joined:
    May 14, 2011
    Location:
    Brainerd, MN





     
  9. twcbitten

    twcbitten Member Established Member

    Messages:
    96
    Joined:
    May 14, 2011
    Location:
    Brainerd, MN










     
  10. twcbitten

    twcbitten Member Established Member

    Messages:
    96
    Joined:
    May 14, 2011
    Location:
    Brainerd, MN














     
  11. twcbitten

    twcbitten Member Established Member

    Messages:
    96
    Joined:
    May 14, 2011
    Location:
    Brainerd, MN













     
  12. twcbitten

    twcbitten Member Established Member

    Messages:
    96
    Joined:
    May 14, 2011
    Location:
    Brainerd, MN


     
  13. twcbitten

    twcbitten Member Established Member

    Messages:
    96
    Joined:
    May 14, 2011
    Location:
    Brainerd, MN


     
  14. 98 svt

    98 svt Premium Member Premium Member Established Member

    Messages:
    16,682
    Joined:
    May 16, 2005
    Location:
    Nunya, MA
    Great thread.
    Is that a UPR next to the MM K?
     
  15. twcbitten

    twcbitten Member Established Member

    Messages:
    96
    Joined:
    May 14, 2011
    Location:
    Brainerd, MN
    Yes, I was having fitment issues for almost a year! Ultimately I decided it had to be the K member. I purchased the MM K. First off I noticed it was extremely heavy compared to the upr and I immediately wished I didnt have to swap them. The MM wasnt even close to mating up to the frame rails using arh headers. My fitment issues ended up being a 1/2" shim between the motor mounts and motor. I milled it down 1/4" and everything lined up. So I kept the upr and sold the MM. I added the pics in case someone wanted to see a side by side comparison.
     
    crazycarlo and 98 svt like this.
  16. twcbitten

    twcbitten Member Established Member

    Messages:
    96
    Joined:
    May 14, 2011
    Location:
    Brainerd, MN
     
    98 svt likes this.

Share This Page