I had squeeking also. Both lower ball joints were busted replaced them and all is fine now
Did your squeaking go away when you would press the brakes?
I had squeeking also. Both lower ball joints were busted replaced them and all is fine now
Any new updates on your squeaking problem, hyelife? Mine has decided to come back as well, so I'm interested to see if you've been able to resolve it.
Hey Evan, I ended up putting in two new Timken hubs with new bearings and cleaning everything in that area. The squeaking went away for a little bit then came back. :shrug:
I didnt want to throw parts at it but it looks like that will be what I end up doing. Im thinking of trying some Rotor Pros rotors to see if that makes any difference.
Sorry to hear that didn't fix it. Keep me posted if replacing the rotor fixes it though. It HAS to be brake related in some way, since our squeaks go away when we press the brake pedal. I just wish I knew what it was because it is very annoying.
same problem here too. at first it was the brake pad not clamping on to the rotor and leaving a little grove in the driver side rotor , replaced the brakes and thought it was the brakes gonna take it apart ..
Guys I just went threw this. I too tried all these fixes from bushings to bearings only to still have a damn creaking noise when turning left. After some searching on here going way back, I came across a thread that recommended changing the strut's because the factory Bilsteins get hammered in short order when the cars are lowered. Long story short, I replaced my struts and it drives like a new car! And the best part my creak is finally gone. My struts were wasted at 64K. Car never really felt like it rode bad to me but after installing new struts I am shocked at the difference. If you have tried it all with no results, replace the struts, it's only a 15 minute job per side.