Supercharger Swap: Fuel Line Disconnect Question

[mtdubvee]

Hey guys,

Im down to my last step in removing my whipple 2.3.

My questions concerns the hard line connecting to the passenger side rear fuel rail, coming from the passenger side.

Can I just pop that off or do I need to relieve pressure from somewhere first?

Thanks,
Matt

 

[hotcobra03]

hit scrader valve or just undo it,,some fuel will drip,have rag handy,,it not like undoing ac line with charge

 

[mtdubvee]

What and where is the Schrader valve?

Once I relieve pressure from this valve, then I can just pop that line loose?

Please advise.

Thanks,
Matt

 

[97snakebite]

What and where is the Schrader valve?

Once I relieve pressure from this valve, then I can just pop that line loose?

Please advise.

Thanks,
Matt

schrader valve is on the passenger side on the front of the rail... to disconnect the line just follow it to the duck bill clamp near the firewall and disconnect from there

 

[mtdubvee]

So the scharder valve is where my fuel supply line goes into the passenger side rail?

Relieve pressure from there?

I have a picture above on where the line should be disconnected after

Is that correct?

Thanks

 

[Quick Strike]

Schrader valve is under the cap on at the front of the engine on the passenger side. Disconnect it as pictured.

 

[mtdubvee]

Sorry but I still dont get where its at.

On the front of the engine with a cap on it?

Got a pic?

Thanks

 

[hotcobra03]

by cyl 2,,its just like a tire valve